Which tool good for 9S12, 908 etc motorola MCU?

Which aregood programmers for 9S12, 908 etc motorola MCU?

preferably a one thatdoesn't require to lift MCU legsand can connect to mcu by connect points on PCB ?

There are lots of Eeprom programmer can read Motorola

her are few:

UPA USB

VVDI Prog

Xprog

SMOK

CPT

and many more.

Car list + Reviews:

1. UPA USBread & write 9S12, 908 etc Motorola MCU.

1) Car list:

Motorola HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A

MC9S12HY64/HA32

Motorola HCS12*: MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256, MC9S12HZ64, MC9S12HZ128, MC9S12HZ256

Freescale (Motorola) HCS12X*: MC9S12XD64, MC9S12XD128, MC9S12XDG128, MC9S12XDP384, MC9S12XDP512, MC9S12XHZ256, MC9S12XHZ512

2) Reviews:

1. MC9S12DG128 - 3L40K reading withXprog

https://www.digital-kaos.co.uk/forums/showthread.php/542947-MC9S12DG128-3L40K-problem-with-reading-UPA-Carprog-and-Xprog

1. How to read 68HC05b16 with UPA.

2. VVDI Progreads & writes 9S12, 908 etc. Motorola MCU:

1). Support list:

reading MC9S12 series Chips, VVDI Pro is more stable than XP Prog.

attacking MC9S12 series Chips, VVDIProg is faster.

MCU

Manufactures	Types	Support	Remark
MOTOROLA	MC9S12XEP	R	Can automatically determine D-FLASH/EEE space
	MC9S12XA	R
	MC9S12XB	R
	MC9S12XD	R
	MC9S12XDT	R
	MC9S12XDP	R
	MC9S12XDQ	R
	MC9S12DG	R
	MC9S12DT	R
	MC9S12P	R
	MC9S12H	R
	MC9S12HY	ï¿¡
	MC9S12HA	ï¿¡
	MC9S12HZ	ï¿¡
	MC9S12XHZ	ï¿¡
	MC9S12B	ï¿¡
	MC9S12GC	ï¿¡
	MC9S12XS	ï¿¡
	MC9S12K	ï¿¡
	MC9S12Q	ï¿¡
	MC9S12C	ï¿¡
	MC9S12P	ï¿¡
	MC9HC(9)08	ï¿¡
ATMEL	ATTINY	ï¿¡
	ATMEGEA	ï¿¡
NEC	uPD70F	ï¿¡
ST	TMS370	ï¿¡

Note: R means the type is supported, ï¿¡ means the type will be supported soon in the future.

2) Review...

Question: Read car BMW 3 with Xhorse VVDI eeprom came up once read in Tango CAS 3 + encrypted can this be done if I have Isn of car let me know please asp

Anser: VVDI prog yes with wires…Eeprom

3. SMOK reads & writes 9S12,908 Motorola MCU:

google and search http://smok.com.pl for official info.

4. XProg reads & writes 9S12, 908 etc. Motorola MCU:

1) XPROG-M V5.84 Authorizations:

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0027-1 HC(S)908 update Authorized 2016/3/13

AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13

2)Reviews on Xprog V5.8 Reads MCU 9S12 XEQ 384 on Rang Rover 2015-2016

Read MCU 9S12 XEQ 384 on Rang Rover 2015-2016

Save P-FLASH and D-FLASH unlock KVM secured

Now, I'll show you the location of a KVM module

And dismantle the module with secured MCU 9S12 XEQ

Read on bench using Xprog HQ clone or original

Then save P-FLASH and D-FLASH unlock KVM secured

Here we go.

Module location inside Rang Rover 2015-2016

Xprog box HQ clone.

The KVM board

Secured MCU 9S12 XEQ

Pin 42 and 46

Lift 1 pins shown in the image.

Maximum wires length 12cm

Secured MCU 9S12 XEQ 384

Run Xprog software v5.8

MCU/MPU, Freescale NXP 9S12XE, MC9S12XEQ384D-FLASH-Secured

Tip & Guide: How to get Xprog to work with secured MCU:

Reset MCU security

Run->change security state->reset MCU security

Wait 10...15 seconds if not success, cancel process

Check connection

Start from a

Remember MCU security byte value

Read, write...commands can be executed many times

Set MCU security

Run->change security sate->set MCU security

Read

Reset MCU security

It will take 10 to 12 seconds to unlock MCU

IP NOT STOP and repeat

Read

Save data

MCU/MPU, Freescale NXP 9S12XE, MC9S12XEQ384P-FLASH-Secured

Read

Save data

Job is done.

That's all.

Thanks.

www.obdexpress.co.uk

http://blog.obdexpress.co.uk/2019/05/27/good-programmers-for-9s12-908-etc-motorola-mcu/

Posted by: OBDexpress.co.uk at 06:14 AM | No Comments | Add Comment
Post contains 560 words, total size 33 kb.