2016 Nisaan Consult iii plus vs old Consult 3

source:http://blog.obdexpress.co.uk/2016/08/30/nissan-consult-3-plus-without-programming-card/

Posted by: OBDexpress.co.uk at 07:37 AM | No Comments | Add Comment
Post contains 473 words, total size 7 kb.

How to use OBDSTAR X100 change KM on Mercedes-Benz ML S350

Here is the DIY instruction on Mercedes-Benz ML S350 2011 year odometer correction by usingOBDSTAR X100 Proauto key programmer.

Here has three choice

 

 

 

BTW,OBDSTAR X300Mcan changeMercedes-Benz ML S350 2011 KM as well,The blue case X300 Pro key programmer is the domestic X100 Pro which adds some Chinese car models. They perform same functions. And OBDSTAR X-100 Pro have several configurations, if you need to adjust mileage,make sure you get the correct package.

 

Odometer correction procedure:
current mileage: 103744 km

connect obdstar x100 to the car
turn ignition on
make the x-100 pro start
select VEHICLES-> MILEAGE ADJUSTMENT-> BENZ-> BENZ V30.00

initializing…
authorizing…
select ML-> S164

input the mileage of the adjustment: 131030

communication…
calibration is successful
disconnect the insurance, on the insurance-after 5 s(seconds)!

now, the corrected mileage: 131008 km

Done!

SOURCE:http://obd2all.blogspot.com/2016/08/how-to-use-obdstar-x100-change-km-on.html

Posted by: OBDexpress.co.uk at 09:44 AM | No Comments | Add Comment
Post contains 205 words, total size 6 kb.

Rework Ktag Kess V2 pcb hardware

source：http://ktagecu.blogspot.com/2016/08/rework-ktag-kess-v2-pcb-hardware-no.html

Posted by: OBDexpress.co.uk at 05:55 AM | No Comments | Add Comment
Post contains 272 words, total size 6 kb.

How to solve Kess V2 v4.036 connection issues fixed

It’s a customer solution of how to fixKESS V2 firmware v4.036master communication/connection issues; that is the computer cannot recognize ktag.



Error message in Kess v2 firmware v4.036 Ksuite v2.22:

connection not established

Customer solution:



I took this UL46 USB protection chip off my old Ktagboard.

this is the UL46 USB protection chip

(if you don’t have this chip, go to the kess v2 vendor for it)



Then Kess v2 v4.036 is detected on usb Everything is ok so far.

This article from Obdexpress.co.uk office tech blog: (solved) Kess V2 fw v4.036 Ksuite connection not established

Posted by: OBDexpress.co.uk at 05:53 AM | No Comments | Add Comment
Post contains 105 words, total size 3 kb.

What pin code reader is better for Nissan

Features & Functions	F102	NSPC001
Support to read BCM codes of all Nissan/Infiniti cars.	√	√
Can transfer 5-digit code to 4-digit code and 20-digit code to 20 digit code.	√	√
No need to connect with computer, plug and play, automatic transfer.	√	√
Program Keys for most of Nissan/Infiniti cars.（not all）	√
Correct Mileage for most of Nissan/Infiniti cars.（not all）	√
No need to buy tokens.	√
One Key Upgrade	√
Have good man-machine interaction.	√
With 100 point built-in tokens.		√
No deduction for 5-digit code to 4-digit code.		√
One point will be deducted for each success transfer of new 20-digit code to 20-digit code and successful reading of BCM code.		√
When 100 tokens used up, you can still use it to get 4-digit code, but you need to buy a new one if you want to read new 20-digit pin code.		√

Posted by: OBDexpress.co.uk at 02:33 AM | No Comments | Add Comment
Post contains 303 words, total size 6 kb.

How to reset BMW airbag with Carprog v8.21 v9.31

It just takes 1 minute to reset and repair airbag computer in your office, with the newCarProg v8.21orCarProg v9.31airbag reset tool.

 

Why you need to reset or replace airbag tool?

BWM airbag sensor after car crash and airbag deployment can by locked (Control unit faulty) and

must be replaced. Even after small accident Airbag sensor will write in internal memory special

error message "crash data stored" or "computer fault” and after you need to exchange very

expensive sensor to new one.

 

What is best for airbag reset?

You are advice thenew Carprog airbag reset tool, not the old one

New airbag reset tool vs old airbag reset tool

+/- supported units ZAE, MRSZ, MRSZ3, MRSZ4 (not all)

+ supported units BAE, ZAE, ZAE2, MRSZ, MRSZ2, MRSZ3, MRSZ4

 

How to use newCarProgfor BMW Airbag ECUs?

1- BAE

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

2- ZAE

No need to remove from car!

EEPROM read/write, Crash Data clear, Error Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

3- ZAE2

No need to remove from car!

EEPROM read/write, Crash Data clear, Error Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

4- MRSZ

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

5- MRSZ2

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

6- MRSZ3 - Temic

 

 

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

7- MRSZ3 - Bosch

 

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

8- MRSZ4 - Temic

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

9- MRSZ4 - Bosch

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

Using these pictures you can erase airbag "on the table” – you must connect GND, +12V,

and Diagnostic line between airbag sensor and BMW Airbag Eraser, connect power supply to GND and +12V and use Eraser like in the car. After erasing don’t connect power supply again – BMW airbag sensor is very sensitive and can write "controller malfunction” error after connection on the table without car.

 

OBDII – BMW 20 pin connection diagram

Also, you can user any OBDII to BMW converter

BMW 20 pin connector

BMW OBDII connector

source: http://blog.obdexpress.co.uk/2016/08/22/reset-bmw-airbag-with-carprog-v8-21-v9-31/

Posted by: OBDexpress.co.uk at 06:50 AM | No Comments | Add Comment
Post contains 498 words, total size 8 kb.

Free download 08.2016 BMW ISPI ETK 3.1.30 Spare Parts Catalog

• detailed part information such as part type, reference number (old part number), price, weight etc., which was previously only possible by searching in different microfilms.
• installation location of a part (part use)
• retrofitting possibilities
• parts belonging to a parts kit
• standard parts catalog
• parts interpretation (history of retrospectively changeable parts)
• spring table
• accessories

Parts catalogBMW ETK 3.1.30models list:

Posted by: OBDexpress.co.uk at 09:28 AM | No Comments | Add Comment
Post contains 582 words, total size 6 kb.

How to use Original Condor XC-MINI to Cut Hyundai Key

Original iKeycutterCondor XC-MINImaster series key cutting machine is a famous key cutting machine it can Support many vehicles:Acura, AlfaRomeo, Audi, BMW, Kia, Lancia, LandRover, Hyundai and so on.

Taday ,we will shares you how toto use Condor XC-MINI master series automatic key cutting machine to cut Hyundai Key.

Tools need:

*Original iKeycutter CONDOR XC-MINI Cutting Machine

*a new key blad

Starting:

Step1. Start CONDOR XC-MINI, click "Key Database”, choose "Hyundai” and click "Confirm” button.

Step2. Input key code, XC-MINI will show you "Series”, "Cuts Note” and "Compatible Key”, click "Confirm” button.

Step3. Now you can see the "Align Line” picture, so you can make the new key blade in right position.

Step4. After that, tighten the key locking knob. Click "Cut” button to start key- cutting. Now you useXC-MINI CONDORto cut Hyundai key successfully.

Done !

Posted by: OBDexpress.co.uk at 07:16 AM | No Comments | Add Comment
Post contains 146 words, total size 5 kb.

Reflash CARPROG FULL V8.21 MCU AT91SAM7S256

Here is a experience from DK forum members who made this possible about how to reflash CARPROG Mcu AT91SAM7S256
Tool use:Carprog clone v8.21 firmware
We need the stuff:
1- AT91SAM7S256.bin
2- Jtag programmer
3- Jtag software

We need to prepare the Carprog to connect to Jtag programmer but first the flash need to be erased, the Jtag function in mcu is disabled, you can't connect to the mcu before erase the flash. Remove the AT88SC eeprom from the board, please note where is the pin 1 in eeprom before remove:

Carefully lift the pin 55 (reset) of the mcu and solder a wire and secure it with a small ammount of silicone (you don't want to broke the pin in the process).
Connect theCarprog(with the pin 55 dissconected) to the 12v supply, wait about 10 seconds and connect the wire from pin 55 to Vcc (3.3V) in Carprog:







Wait from 5 to 10 seconds after connect the 12v supply, the flash content will be erased and the Jtag option of the Mcu will be enabled now. If not work leave connected for about 3 to 5 minutes. Disconnect the 12v supply from CarProg full and remove the pin 55 wire from vcc. The pin 55 must remain disconnected until the programming process is done.



Ok, that’s it. I make it; and you try on you risk.

SOURCE:http://blog.obdexpress.co.uk/2016/08/18/reflash-carprog-mcu-at91sam7s256/

Posted by: OBDexpress.co.uk at 03:41 AM | No Comments | Add Comment
Post contains 233 words, total size 4 kb.

Easiest way to change mileage on Cayenne 2008

How to change mileage for Porsche Cayenne 2008? Now ,obdexpress.co.uk shares the easiest way to change mileage on Cayenne 2008.

Let's go!

Tools can use :

OBDSTAR X300M(two functions: Odometer Adjustment+OBDII)

OBDSTAR X300 PRO3( more functions: Immo+Odometer Adjustment+EEPROM/PIC+OBDII)

Here, Obdexpress.co.uk engineers use OBDSTAR X300 PRO3 programmer for mileage adjustment on Cayenne 2008.

connect X300 PRO3 to the obd port on the car

communication...

input the file name to save: 11000000

then X300 PRO3 displays the input value 11000000

X300 PRO3programmer read the current mileage: 1122008km (error does not exceed 10km)

input the new mileage for km change: 12345

X300 PRO3 is adjusting the mileage...

milege adjustment complete

" width="600" height="338" data-mce-src="http://blog.obdexpress.co.uk/wp-content/uploads/2016/08/obdstar-x300-pro3-change-km-Cayenne-2008-8-600x338.jpg" />

Cayenne displays the new mileage on the dashboard

Done!!!

Posted by: OBDexpress.co.uk at 02:57 AM | No Comments | Add Comment
Post contains 124 words, total size 4 kb.

How to solve CAN Clip v159 RLT 2002 Probe “Failure of reservation of probe”

Here are optional user solutions for theRenault canclipv159was connected to PC, detected with the number926 573and recognized "RLT2002PROBE”, but CLIP popped an error message-"Failureofthereservationoftheprobe.Tryitagainandcontacttechnicalassistanceincaseofanotherfailure”.

--> First, you can try theeasysolution:

check in device manager, it is alliance B

yes works with both but not work on both on same partition so better to install on different computers or use the boot it.

best to install Clip first and let that update the firmware and then installConsult 3and enter serial you saw in Clip software , as above.

I have made it many many times .

-->Still not work??

That is....

You don't have a real CAN CLIP RLT2002 PROBE
You have a hybrid of Alliance VI in CAN CLIP case
It will work good don't bougter of it
It will install only one driver instead of 4 as for real CAN CLIP Probe
And much more of this it is working witConsult III softwaretill 9.21.02 as well

You can check and see the difference between this two kind of Chinese clones:

real CAN CLIP PROBE clone - RLT2002

Allianbce hybrid Can Clip sonde - 926573

This article is from the obdexpress.co.uk official technical blog:CAN Clip v159 RLT 2002 Probe "Failure of reservation of probe” (solved)

Posted by: OBDexpress.co.uk at 03:42 AM | No Comments | Add Comment
Post contains 219 words, total size 3 kb.

How to use OPCOM for SBR warning sound status OFF

It’s aimed to help useOPCOM v1.59to set seat belt reminder warning sound status OFF.

Purpose:

Op-Com set seat belt reminder war ning sound status OFF for Opel Astra H.

You need:

A workingOPCOM(opcom fw: v1.59 better)

How to setup seat belt reminder warning sound OFF in OP-COM program:

SelectAstra H

ThenBody

ADM (Airbag)

Read vehicle info and then clickProgramming

Program ECU

Setup SBR warning sound statusOFF

ClickPerform SBR coding

Finally,SBR configuration programmed successfully!

" src="http://blog.obdexpress.co.uk/wp-content/uploads/2016/08/opcom-aet-sbr-reminder-off-8.jpg" />

Original:http://blog.obdexpress.co.uk/2016/08/15/how-to-use-opcom-for-sbr-warning-sound-status-off/

Posted by: OBDexpress.co.uk at 08:24 AM | No Comments | Add Comment
Post contains 84 words, total size 4 kb.

8 step to update Scania VCI 2 VCI3 SDP3 v2.27 truck diagnostics

Scania VCI 2 VCI 3 softwarehas updated to Scania Diagnosis and Programmer 3SDP3 v2.27. Here is the instruction on how to install / setup Scania VCI 2 VCI 3 SDP3 v2.27 on Windows 7 32bit operating system.

Step 1 - Read read me 2.27.txt to get the installation instruction

Step 2 - Install AdbeRdr920_en_US.exe

Step 3 - Install NDP46-KB3045557-x85-x640-allOS-ENU.exe

Step 4 - Install vcredist_x86.exe

Step 5 - Install scania Diagnosis & Programmer 3 2.27.exe

" width="600" height="375" data-mce-src="http://blog.obdexpress.co.uk/wp-content/uploads/2016/08/update-scania-vci2-sdp3-2.27-8-600x375.jpg" />

Step 6 - Once finished, run x32 folder the "install.exe”

Pass: 6426758

When required, allow install.exe to install driver

Step 8 - Run Scania SDP3 2.27 program

Run SDP3 configuration to setup language, authentication, interface and SDP3 update

Language available: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian.

Run SDP3

" width="600" height="375" data-mce-src="http://blog.obdexpress.co.uk/wp-content/uploads/2016/08/update-scania-vci2-sdp3-2.27-18-600x375.jpg" />

Then you can useScaniaVCI 2 SDP3 v2.27or VCI3 Scannerto

Stored fault codes, proposals for remedial action and delete option.
Control unit configuration and settings.
Information about electrical components and their location.
Input and output signals.
Activation of components.
Spare part programming.
Circuit diagrams of the respective vehicle.
Chassis data.
User functions to meet service market requirements to work more effectively, e.g. cruise control.

source:http://blog.obdexpress.co.uk/2016/08/13/update-scania-vci-2-vci3-sdp3-v2-27-truck-diagnostics/

Posted by: OBDexpress.co.uk at 04:22 AM | No Comments | Add Comment
Post contains 207 words, total size 8 kb.

Multi-language VAG CAN PRO v5.5.1 full kit functions,price,software(for all )

obdexpress.co.uk is verified to clone VAG CAN PROVAG CAN PRO v5.5.1 full kitcan work as the original does,like diagnosis, VAG CAN PRO full kit with VPC v5.5.1 is designed for CAN BUS + K-Line and UDS main diagnostics and programming ,VAG CAN PRO Works with vehicle Volkswagen, Audi, Seat, Skoda ,made from 1990 to 2015.

part 1 :about VAG CAN PRO

Q:Can VAG CAN PRO support Danish ?

A:Yes!and this tool can support English, Cestina, Danish,German,Hrvatski,Itanlian, Dutcj,Polish,Russian, Spanish also well .

Q: Is the VAG CAN PRO a full version?

A: yes, it’s VAG CAN full kit.

Q: Does clone vag can supports coding and programming?

A: definitely yes. The VAG CAN PRO at obd2express can do coding and programming as the original.

Moreover, the clone doesn’t need engineer codes for coding or programming, while the genuine needs it.

Q: Does it support UDS protocol?

A: yes. It supports CAN BUS, UDS, K-line.

Part 2 :about VAG CAN PRO vs VAS 5054A vs VCDS
5054a ODISis OEM, so it fully supports every VAG model, but it’s slow and you need online connection for being able to do a lot of things.

VCDS is super fast, best to read DTC’s and do basic stuff and some coding, but it doesn’t work well with new MQB platform.


VCPis little bit a mix of those, reads DTC fast, every feature is done offline, and work very well with MQB.

Part 3: VAG CAN PRO VPC 5.5.1 vs VAG-COM VCDS:

VCDS and VAG CAN PRO + K are very close level features (there is also a small resemblance in the software interface of the two).

VCDS is the best known and most used of the two, so you more easily find topics on speaking forums VCDS that VAG CAN PRO + K.

diagnostic Level, VCDS exceeds VAG cAN PRO + K, even if it progresses from version to version.

coding level, some encodings are sometimes not possible with VCDS then they are with VAG CAN PRO + K (RLFS coding, coding ESP, also VIM coding which is a "specialty” of VAG CAN PRO + K).

more anecdotally, sometimes with some encodings require VCDS resume it several times before it is taken into account by the vehicle, while with VAG CAN PRO + K it works 1 shot.

the VAG CAN + K PRO software has a list of predefined functions, kinds of shortcuts to quickly do some actions without knowing the value of adaptation or corresponding coding.

It also has a backup feature and flashing the entire contents of a computer, that does not have the VCDS software.

prices level, it’s a little more complicated for VAG CAN PRO + K.

in official, there is a price to pay (€ 306.27) for the purchase of the interface (this price includes free updates for 1 year), there is a price to pay (50 € per year) for 1 year annual subscription to updates and there are also 3 price to pay to activate each of the three following additional features:

flash EDC-16 (65 &euro ,

ESP coding (95 &euro ,

access to all files for VIM coding on various VAG vehicles (105 &euro .

(it is rare, but the VAG CAN + K PRO interface is also in clone / unofficial 3 with additional features enabled, clone VAG CAN PRO for nearly 45€ from http://www.obdexpress.co.uk/wholesale/new-…)

Part 4 escription:

Firmware:clone version VAG CAN PRO

Software: version 5.5.1

VAG CAN PRO 5.5.1 update news:

Support for new addresses entered in the MLB-Evo platform

Update database-ODX (support for all models 2015)

How to users think of VAG CAN PRO diagnosis?

** Audi A4 8E B6 owner says:

This model has a can-bus (TP1.6), but it is not connected to the diagnostic socket. The car is fully diagnosed on the K-line (VCP required interface + K). Used protocols KWP2000 and KWP1281 it.

** Audi A4 8E, B7 owner says:

This model has a CAN BUS TP2.0, but the diagnostic socket is only connected to the so-called CAN-Antrieb, i.e. Engine, transmission, airbags, ABS, Quattro drive.

In addition, a standard K-line. In other words, VCP fully supports the diagnosis B7 models, but only in the CAN-Antrieb. Other controllers are available through the K-Line and KWP2000 KWP1281 protocols.

** Mike talks about differences between VAG CAN PRO (VCP) and VCDS:

I have both, and can say with absolute certainty that VCP does NOT replace VCDS in any way.

VAG CAN Commander is a tool used to retrieve and modify information from the program area of the ECU.

VCDS will give full access to all control modules in the car for diagnostic purposes. It will not allow you to modify the program memory of any ECU. Having said that, VCDS does allow you to "code” a module – selecting different factory installed options. All diagnostic procedures performed by the factory tool at the dealer can be performed using the VCDS tool. In fact, the tool design is made to conform with the same terminology used on the factory tool so that factory repair information can be used with the VCDS tool.

s on your PC. VCDS only supports the functions built into the modules that were intended by the designers for diagnosing problems and effecting repair of those problems.

What functions has been TESTED OK by obd2express engineers?

* Unique features OCLF service procedures (One-Click-Function);

* inexpensive flasher for VAG;

* inexpensive flasher with support UDS controllers;

* ESP MK60EC1 decision coding blocks;

* a tool for a complete diagnosis MQB platform (Golf VII, Octavia III) Support to 01.2013;

* ZDC-loading containers in the electronic components;

* Unlock video in motion (VIM) on the MQB platform (Discover Pro and MMI-MQB);

* Coding controllers for PR-codes;

* "Login finder” – allows you to scan and logins in the CAN controllers UDS;

* Support for the new Polo in 2014 Facelift;

* Support for the new Passat B8;

* Full support of Audi TT-3 on the platform of the IBC;

* Full support for Skoda Fabia III

What models can be supported?

The VCP Scanner support CAN BUS + UDS + K-Line for diagnostics and programming of electronic components used in vehicles Volkswagen, Audi, Seat, Skoda, made from 1990 to 2015.

Audi

A2 2009-

A3 8P 2003-

A3 – platform MQB-

A4 model 8E wariant B7 (Engine, transmission, airbags, ABS, park) 2005-

A4 model 8K wariant B8 (UDS + TP2.0) 2008-

A5 model 8K (UDS) 2007-

A6 model 4F 2004-

A8 model 4E 2003-

Q3 (UDS) 2010-

Q5 (UDS) 2008-

Q7 (TP2.0 + UDS) 2006-

S5 model 8K

(R)S6 model 4F

R8 (UDS)

TT model 8J 2007-

Mercedes

Sprinter (VW Crafter) – – Only the engine and immobilizer

Seat

Altea

Leon MQB 2013-

Leon model 1P 2005-

Toledo model 5P 2004-

Exeo 2008- (Engine, transmission, airbags, ABS, park)

Skoda

octavia model 1Z 2004 –

octavia platform MQB –

superb II B6 2008-

fabia model 5J 2007-

yeti 2009-

Volkswagen

Crafter (immobilizer, engine)

Caddy model 2K 2005-

Eos

Golf V model 1K

Golf VI model 5K

Golf VII platform MQB

Golf Plus

Jetta II model 1K

Transporter / Multivan (Only after the CAN-BUS drive for storing data)

Multivan/Transporter GP model 7E (UDS) 2009-

Passat B6 model 3C 2005-

Passat CC-

Phaeton GP 2007-

Polo model 6R 2009-

Polo FL MQB 2014-

Scirocco III-

Touran-

Tiguan-

Touareg GP 2007-

Touareg NF 2010

Posted by: OBDexpress.co.uk at 06:50 AM | No Comments | Add Comment
Post contains 1232 words, total size 22 kb.

discussion of Multidiag pro 2014.3 PROS and CONS

http://yellowbend.blogspot.com/2016/08/multidiag-pro-vs-tcs-cdp-pro-vs-autocom.html

Posted by: OBDexpress.co.uk at 08:44 AM | No Comments | Add Comment
Post contains 469 words, total size 6 kb.

Can OPCOM v1.39 firmware read security codes for key programming and immo

Posted by: OBDexpress.co.uk at 06:33 AM | No Comments | Add Comment
Post contains 273 words, total size 8 kb.

How to use OBDSTAR X300 PRO to change mileage on Volvo S80

source:http://obd2expresscouk.blogspot.com/2016/08/using-obdstar-x300-pro-to-change.html

Posted by: OBDexpress.co.uk at 03:19 AM | No Comments | Add Comment
Post contains 139 words, total size 13 kb.

How to use OBDSTAR X300M to change mileage on Audi Q5 2010

ReceivedOBDSTAR X300Mpackage for a few days and discussed a lot about it on forums. Sounds an interesting topic. Here share something what i did on this OBDSTAR X300M unit yesterday.

I used X300M for my Audi Q5 2010 to change km. Very easy; all i did was to follow the screen instruction only.

The km before change: 22850km

And this is the item for mileage adjustment; it;s obdstar x300m

" src="http://blog.obdexpress.co.uk/wp-content/uploads/2016/08/Audi-Q5-odometer-correction-by-OBDSTAR-X300M-8-600x338.jpg" />

Connect X300m to the OBD port on Q5

Then, follow to screen

Select the models:

VEHICLES->MILEAGE ADJUSTMENT->AUDI/VW/SKODA/SEAT

Select software AUDI/VW/SKODA/SEAT V31.11 for ready use:

Loading software ...

Initializing...

Authorizing...

Select AUDI A5 2010

" src="http://blog.obdexpress.co.uk/wp-content/uploads/2016/08/Audi-Q5-odometer-correction-by-OBDSTAR-X300M-8-600x338.jpg" />

Then go to MILEAGE ADJUSTMENT

The X300M first read the original km (my Q5: 22850km) after communication

Next, to setup the new mileage; i input 105312

X300mchange km by itself (about 10-25 min)

The dash also displays the same mileage.

So, it’s successful.

Buy it from:http://www.obdexpress.co.uk/wholesale/obdstar-x300m-odometer-adjust-obdii.html

SOURCE:http://www.mileageprogrammer.com/using-obdstar-x300m-to-change-mileage-on-audi-q5-2010/

Posted by: OBDexpress.co.uk at 07:32 AM | No Comments | Add Comment
Post contains 161 words, total size 9 kb.

New FLY OBD Terminator Locksmith Version& Free J2534 Software

FLY company has newly releasedOBDTerminator Full Version& Locksmith version with free J2534 DrewTech Software,like Honda HDS,JLR SDD, Toyota TIS, IDS, etc.This is full immobilizer version with free update online.

Software Version:

1. Firmware version: V1.072;
2. Software version: V1.100;

languages:

English.

Operation Notes:

OBD Terminatorcan work for Windows XP(SP2 or later) Professional Version,Windows 7 Ultimate and Windows 8 Professional.

OBD Terminator Locksmith Version Function:

1. Immobilizer function
2. Odometer correction
3. Diagnostic function: read & erase trouble codes.

Car list:

1. OBD Terminator for VAG - VW, Audi, Seat, Skoda;
2. OBD Terminator for Porsche ;
3. OBD Terminator for Mercedes/Smart/Maybach ;
4. OBD Terminator for OPEL/VAUXHALL ;
5. OBD Terminator for BMW;
6. OBD Terminator for Peugeot/Citroen;
7. OBD Terminator for Fiat/Alfa/Lancia;
8. OBD Terminator for Renault;
9. OBD Terminator for Toyota/Lexus;
10. OBD Terminator for Hyundai/KIA ;
11. OBD Terminator for Nissan/Infiniti;
12. OBD Terminator for GM;
13. OBD Terminator for Ford;
14. OBD Terminator for Volvo;
15. OBD Terminator for Chrysler, Dodge and Jeep;
16. OBD Terminator for Mitsubishi;
17. OBD Terminator for DAF;
18. OBD Terminator for Honda;
19. OBD Terminator for Mazda;
20. OBD Terminator for Chinese Cars;
21. etc;

OBD Terminator function list:

Honda
1.Honda unlock immobilizer system（2001 to 2007 years）
2.Honda unlock immobilizer system（2008 to now years）
3.Honda unlock engine system
4.Honda change VIN to emergency code
5.Honda unlock smart key system
6.Honda odometer

VAG-VW, Audi, Seat, Skoda
1.VAG-VW, Audi, Seat, Skoda immobilizer Generation 4
2.VAG-VW, Audi, Seat, Skoda immobilizer Generation 5
3.Audi A6/Q7 immobilizer Generation 4.5

Ford/Mazda
1.Ford/Mazda immobilizer
2.Ford/Mazda module programming for brushing hidden function
3.Ford/Mazda odometer

BMW
1.BMW CAS1/2/3
2.BMW CAS4/4+
Remark: Automatic recognition models for immobilizer.

PCB Board Display:

OBD Terminator TAG PCB:

OBD Terminator Software Quick Loader:

OBD Terminator Softwares:

Note:2016 FVDI2 FVD II has OBD Ternimator and Free J2534 software as well.

Posted by: OBDexpress.co.uk at 03:23 AM | No Comments | Add Comment
Post contains 315 words, total size 7 kb.

Mercedes Smart Key Teach-in support k-line Smart (1998-2002)

Smart KeyTeach-inonly supports Mercedes-Benz Smart (1998~2002) with K-line protocol.

SmartKeyTeach-insupportECUtype as follows:

MB-Smartvehiclesdonglekeyprogrammer

SMARTTeach-inisrequiredwhenkeysarelost,damagedorifadditionalkeyisneeded.
Also,thisproceduresynchronizesengineECUwithBSI-canbeusedwhenchangingdamagedECUorBSIwithnew/usedone!

ForadaptingeachremotewithImmobilizer/BSImodulethefollowingdonglecanbeused:
1.TurnignitionONwithoutstartingengine(position"1").
2.InsertdongleinOBDconnector(itislocatedundersteeringcolumn,nearpedals).
3.TheLEDsmustlitboth,thengreenmustblinkfewtimes.IfallOK,greenLEDremainslitandredmustbeoff.IfredLEDblinksfast,thismeansanerror,youmayremovedongleandtryagain.
4.IfredLEDisoffandgreenison,turnOFFtheignitionkey.
5.PresstwiceLOCKbuttononeachremote(if3buttonremoteused)within30sec.Maximumof4keyscanbeprogrammed.
6.TurnignitionONagain,thiscompleteslearningsequence.RemotecontrolsareworkingonlywhenignitionisOFF,crankingispossibleonlywhenvehicleisinUNLOCK-edstate.

http://www.obdexpress.co.uk/

source: http://blog.obdexpress.co.uk/2016/08/05/mercedes-smart-key-teach-in-support-k-line-smart/

Posted by: OBDexpress.co.uk at 08:57 AM | No Comments | Add Comment
Post contains 34 words, total size 3 kb.