December 29, 2017

What did I do for Corvette C7with Tech II clone

I have a lot to recommend having aTech II clonefor DIY work on our cars.

Tech II clone


For the way that you are going to be using the Tech II clone, your going to be fine with it.


As for why GM is going to theGM MDIand aGDS2, instead of using a Tech II with TIS2000 software, it because the MDI with GDS2 flashes a hell of lot faster when you have flash a new module with either it orginal firmware or upgraded firmware. Its also faster to use than having to press buttons on the Tech II for basic commands during diagnostics as well.



So in regards to the vets, Tech II clone will cover all the Chevrolet Corvette C6 cars and older since the last of the updated firmware on the unit covers from here back. If you do need to reflash something, it's done via Tis2000 with the Tech II as the pass through device.



On a Chevrolet Corvette C7, since GM did not make upgraded firmware to flash into the Tech II's to cover these cars, then it's a MDI that is needed instead. As for the MDI's firmware, they will cover no only the new cars, but the cars that the old Tech II's used to cover as well.


Now the glitch on the MDI regarding cloning it, since it has to use the GDS2 software for the pass through only device, GDS2 software has not been cracked like Tis2000 software has been isntead.


So the only way that even a clone MDI is going to work, is to have a subscription to GM (Few $K a year) to allow you to use the GDS2 software that has to log into GM each time it used instead.


Hence the Clone Tech II unit you get will already be loaded with the most current firmware, and for most of the stuff you going to use the Tech II clone, will just be using the unit by itself without being connected to a lap top.


Also the cracked copy of Tis2000 that you get with the clone model, does not have to be connected/logged into GM to use it for 99% of the stuff (do not need an account with GM).

Note, if push comes to shove and you can not find a copy of the needed firmware to flash into a unit to upgrade a module, then you can get a one day subscription to GM to pull down the needed file from them.


Another place the people have had good luck with as well.



Do not worry about what version ofwindowsyou are running.

Hence if you are running win 10, and the software needs to run on wp, then you can runs something like VM player (free) to vm XP on the machine to run under that shell. Hell the cracked version of Tis2000 will come with VM player to begin with. So the Cracked TIS200 disc first installs VM player to your machine with a XP shell, then installs Tis2000 to that shell when you install the disc.

So when you start the cracked TIS200 program after loading the disc, it first loads the VM player software, then opens TIS2000 in that VM player running in XP, on your win 10 machine.

As for a cracked version of GDS2 and all the other software needed as well like Tis2web), if someone has skinned that cat, and it will work with aGMMDI II clone, then it just a mater of time before they hit the market as well.

Hence with the Tech II since it preflashed with 33.004 firmware , it does not have to be connected to a PC for 99% of what is going to be use for. Since the Mdi II is PC driving only, then you get into the can of worms with all the needed Software cracked so you don't have to web connect toGMto run the software instead.

Quick way of how GDS2 works, with having to renew the software lease every 14 days, and also needing a SPS subscription to reflash as well.



 


Really to sum it up, since the clone Tech II work on the c6 vets, we have lucked out that the clone units are dirt cheap now. Its the C7 guys that are now having to play the waiting game to get their hands on a Working cloned MDI 2 with all its needed cracked software so they are not being raped by thedealersever time thetoolis needed. Hence just like the C6, the C7 has apumpin theABSsystemthat needs to be cycled via thetoolevery time you bleed thebrakesto flush the oldfluid(and air if thesystemwhen dry) out every few years, and although there are othertoolsthat can be used to do such instead, none of them are currently cheap instead.

Hell, with aclone Tech IIgoing for around $200, if you did the inflation math of when you used to have to buy a timinglightfortuningaengineof the old of say pre 90's, pretty much about the same price; while the Tech II doing so much more instead. Plus when you go to sell the vet in a private party sale, having a Tech II to go with the car is a huge selling factor as well; so your really not out of money in the end no mater how you look at it buying one .

The way I look at it, the vet should have come with not only a Tech II to being with, but also abatterytender and TPMS resettoolas well. Think about that, since most cars today will still display codes on the dash if it has problems (no scanner needed), while on the vet it will not. C5 you could a magnet to reset the TPMS, while on the C6 you can not. Andbatterydrain when the car sits for days/weeks, hell the C6 should of had a plug inportwith a built in tender on the car as well.



Last edited by Dano523; 12-13-2017 at09:13 AM.




SOURCE:

http://blog.obdexpress.co.uk/2017/12/29/tech-ii-clone-perfect-with-chevrolet-corvette-c7/

Posted by: OBDexpress.co.uk at 09:28 AM | No Comments | Add Comment
Post contains 1010 words, total size 16 kb.

How to update key - Diatronik CALC Tool

Q: Please can you tell me how to updateDiatronik SRS+DASH+CALC+EPS OBD Tool?

A : Diatronik key update help. Here you go.


  1. After the first run utility screen will appear where you select to Start new dongle remote update session:
  2. how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-1
  3. On the next page displayed is the generated update request (number-question) is a sequence of hexadecimal characters containing information about your key:

how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-2

The update query can be stored in a file (button [To file]), copied with the button [To clipboard] or sent as email to developer ([mail]).

Archive the text file with results using your GCT serial # as file name and email it to developer. The update program can be closed at this stage. Wait for response email from the developer.

  1. Data updates are transmitted in encrypted form and can only be used once
  2. When generating the update data and during firmware update the key performs a series of checks on key options (ID, Shared code, and some others). This excludes the possibility of substitution of the key.

You must then run the client update utility again and select "Resume previously started remote update session”, then click [Next] button.

how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-3


The screen will display the wizard page that contains the input field and display dump updates. Enter the dump received via email using one of the buttons: [Paste] or [Browse…]:

how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-4

After inserting the dump and pressing [Next] button the operation for updating the key memory with new data. Then last screen will display the outcome of the operation:

how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-5

Important!

Next steps are only needed when the update key is in fact the firmware or image template. If the update was performed based on data of the image file, then step 3 is the final stage of the upgrade.


In the process of updating the key memory client utility will generate the final code-confirmation containing information about the updates ( successfull/ unsuccessfull). Code-confirmation is to be saved (button [To file]) or copied [To clipboard], renamed using your serial # as file name and sent to developer of the application by any convenient way (email, PM, Skype: moe03071 ).


Youtube video (Russian)


Crdits to Moe who share all above with us.


Source:

http://www.obdexpress.co.uk/service/diatronik-calc-tool-key-update-25651.htm


Posted by: OBDexpress.co.uk at 01:35 AM | No Comments | Add Comment
Post contains 360 words, total size 18 kb.

How to update key - Diatronik CALC Tool

Q: Please can you tell me how to updateDiatronik SRS+DASH+CALC+EPS OBD Tool?

A:Diatronik keyupdate help. Here you go.


  1. After the first run utility screen will appear where you select to Start new dongle remote update session:
  2. how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-1
  3. On the next page displayed is the generated update request (number-question) is a sequence of hexadecimal characters containing information about your key:

how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-2

The update query can be stored in a file (button [To file]), copied with the button [To clipboard] or sent as email to developer ([mail]).

Archive the text file with results using your GCT serial # as file name and email it to developer. The update program can be closed at this stage. Wait for response email from the developer.

  1. Data updates are transmitted in encrypted form and can only be used once
  2. When generating the update data and during firmware update the key performs a series of checks on key options (ID, Shared code, and some others). This excludes the possibility of substitution of the key.

You must then run the client update utility again and select "Resume previously started remote update session”, then click [Next] button.

how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-3


The screen will display the wizard page that contains the input field and display dump updates. Enter the dump received via email using one of the buttons: [Paste] or [Browse…]:

how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-4

After inserting the dump and pressing [Next] button the operation for updating the key memory with new data. Then last screen will display the outcome of the operation:

how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-5

Important!

Next steps are only needed when the update key is in fact the firmware or image template. If the update was performed based on data of the image file, then step 3 is the final stage of the upgrade.


In the process of updating the key memory client utility will generate the final code-confirmation containing information about the updates (successfull/unsuccessfull). Code-confirmation is to be saved (button [To file]) or copied [To clipboard], renamed using your serial # as file name and sent to developer of the application by any convenient way (email, PM, Skype: moe03071 ).


Youtube video (Russian)


Crdits to Moe who share all above with us.


Source:

http://www.obdexpress.co.uk/service/diatronik-calc-tool-key-update-25651.htm


Posted by: OBDexpress.co.uk at 01:35 AM | No Comments | Add Comment
Post contains 355 words, total size 16 kb.

December 27, 2017

What is VCM II SP177-C1?

What is VCM II SP177-C1:

VCM II SP177-C1is the best Ford VCM2 China clone with item number 177.


It’s originated fromMHHforum and indicates vcm2 units fromobd2express.co.uk(now, it’s updated toobdexpress.co.uk)

vcm-ii-sp177-c1

vcm ii sp177-c1 link:

vcm ii sp177-c1 reviews:


vcm ii sp177-c1 basic info:

 

Hardware:2017 version

Software:Ford IDS V100


WiFi:supported


Update:Free Ford IDS software download via Mega link thoughhttp://blog.obdexpress.co.uk/


Quality:Best


Item number

SP177

SP177-1

SP177-C

SP177-C1

SP177-C2

SP239-B

SP10-D

SP10-T

WIFI adapter

NO

NO

NO

YES

YES

NO

NO

NO

Software

V101

V101

V100

V100

V97

V97

IDS V86 JLRV145

IDS V86 JLRV145

Software

Ford

Ford

Ford

Ford

Ford

Ford and Mazda

Ford, mazda, Land rover, jaguar

Ford, mazda, Land rover, jaguar

Quality

Ordinary

B

A

A

B

Ordinary

stable

stable

VMware

YES

YES

YES

YES

YES

YES

NO

NO

Update

Yes

Yes

Yes

Yes

Yes

Yes

NO

NO

pin code calculator

NO

NO

NO

NO

NO

NO

YES

YES

vcm ii sp177-c1 is the Quality A version, supports WIFI and comes with the best PCB design. Works faster and more stable than any other units.


vcm ii sp177-c1 look:

best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version-1best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version-2best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version-3best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version-4best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version-5best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version-5


That’s all for why VCM II SP177-C1 is the best China clone VCM2.

Source:

Posted by: OBDexpress.co.uk at 09:54 AM | No Comments | Add Comment
Post contains 200 words, total size 28 kb.

December 26, 2017

Should I have a Kess V2 China clone or EU clone?


Q: How to know my Kess V2 is a China clone or an EU clone? What’s the difference?

 Kess V2 China clone


A : It’s simple; just lookpurplePCB, then you can be 100% sure its build EU clone. ChinahavegreenorredPCB.

But remember, full reworked green Kess V2from China also works well. And it islow budget clonefor start business.


Kess v2 EU purple PCB and China green/red PCB can be found here:

It’s a good write-up of Kess V2 PCB.


But you have to know- no matter what thecolourof thepcbis istsapcb

the main thing is good quality partsthatsis allthatsneeded

a china kess/ ktagfgtech or any other board if reworked will work exactly as it should

eumade/ pcbis a gimmick in most sellers (would like to see proof otherwise)

all theeuboardsihave seen have been china madepcb’ssome reworked some not even changed but sold aseumade.

the purpleeumadekessandktagscan someoneproovewhere intheeuthey are made?

poland maybe orgermanyetc but asisaid before makes nodiferencewhatsoever if the parts are good quality then thepcb’sare all the same

they all use the same project to make thepcb’s



http://www.obdexpress.co.uk/service/galletto- kess- ktag-review-12434.html

Posted by: OBDexpress.co.uk at 06:56 AM | No Comments | Add Comment
Post contains 186 words, total size 12 kb.

December 25, 2017

Free download VVDI MB TOOL V3.6.0


Update info:

************************************************* *********************

2017-12-23

*** Require firmware V3.6.0

************************************************* *********************

===== BENZ V3.6.0 =====

1. Attention: All user update device to firmware v3.6.0, software v3.6.0, the lower version don’t support password calculation

2. Add Upgrade Kit, use upgrade kit to update the firmware. Menu->Update Online->Upgrade Kit

3. Improve the success rate of BAG key password, erase password and enable key password

1) The server have 99% success rate for key password now (You can get key password for only 1 time calculation)

2) Save the key password calculation time, we only need about 20 seconds for 1 time calculation

3) The server have 99% success rate for erase password and enable key password now

4) Add some old version NEC key for password calculation

5) We will continue update our server to achieve good result for BAG key password, erase password and enable key password

4. Support activate EIS from OBDII. Menu->Other Function->Customer request->Activate EIS

5. Support activate W906(NEC) ELV from OBDII

6. Bugfix

vvdi mb tool 3.6.0vvdi mb tool 3.6.0-02vvdi mb tool 3.6.0-03

Source:

 

Posted by: OBDexpress.co.uk at 03:33 AM | No Comments | Add Comment
Post contains 178 words, total size 7 kb.

December 22, 2017

Kess V2 fw 4.036 fails to read truck ECUs, Why & How to fix?

My Kess V2 firmware 4.036 fails to read truck ECUs. Why? And how to rework?


I bought a KESS V2 CLONE, runs on cars and motorcycles, but the protocols are disabled TRUCK. LISTEN TO BE CHANGING NXP and change the firmware to operate in trucks. Could anyone help?


I LEAVE MY DATA KESS.


FW version: 4.036

Serial number: K10033818

Customer Code: C7514

Group Code: C7514


Reply : I guess you bought the wrong type. There are are many kinds of Kess 4.036.

Somecannot support trucks at all.

You should have a small part ofkesssupports lots of trucks and motorcycles (called truck version)


See this...

In the item list, only SE87-K, SE87-CK can work for trucks.


Look at the chart below...details attached

Item No.

SE87-D

SE87-CK

Kess v2

Kess V2 v4.036

forCAR

Kess v2 v4.036

forTRUCKs

Image

kess-v2-se87-d

kess-v2-se87-ck

Price

€165.00

€116.99

Firmware

Kess V2 v4.036

Kess V2 v4.036

Software

Ksuitev2.22


KsuiteV2.22/V2.08

(V2.22 versioncan notconnect internet, V2.08 canworkswith internet)

Tokens

Unlimited tokens,

with a renew button to add tokens

With 30 tokens,

Vehicles

For Cars only;

No truck!

No motorcycle!

Best forTrucks !

Motorcycle!

Bike;

Car;


kess-v2-truck-car-list-1kess-v2-truck-car-list-2kess-v2-truck-car-list-3kess-v2-truck-car-list-4kess-v2-truck-car-list-5kess-v2-truck-car-list-6kess-v2-truck-car-list-7kess-v2-truck-car-list-8kess-v2-truck-car-list-9kess-v2-truck-car-list-10kess-v2-truck-car-list-11kess-v2-truck-car-list-12kess-v2-truck-car-list-13kess-v2-truck-car-list-14kess-v2-truck-car-list-15kess-v2-truck-car-list-16kess-v2-truck-car-list-17kess-v2-truck-car-list-18kess-v2-truck-car-list-19kess-v2-truck-car-list-20kess-v2-truck-car-list-21kess-v2-truck-car-list-22kess-v2-truck-car-list-23kess-v2-truck-car-list-24kess-v2-truck-car-list-25kess-v2-truck-car-list-26kess-v2-truck-car-list-27


If youdontwant to buy a newkessv2 programming tool. You can change the firmware to v3.099with a newnxpLPC2478, new serial and new update with trucks.

Alsoyour china PCB must bepreapredto handle the 24v

Personally, You are not advised to do so because of high risk and I hold noresponsibilty.


Posted by: OBDexpress.co.uk at 09:56 AM | No Comments | Add Comment
Post contains 253 words, total size 33 kb.

December 21, 2017

SDconnect C4 DAS Fault (1.2)-2.503.9901: Solved & Worked again

Phingocin trouble:

The laptop is a Dell D630 with a chinaSDconnect C4.
Xentry 03/2012
DAS 03/2012

It was all working fine last i used the machine.

So.. I connect the MUX to the car (smart 451), and then the lanwire to the mux and computer. Then i turn on the ignition.

In xentry i choose Smart -> 451 -> Diagnostic -> Das opens
in das: Identify car by control unit. After a few seconds some update thing appears and disappears followed by an error.(see att.) Fault (1.2)-2.503.9901. Cannot connect to car.

DAS-Fault-(1.2)-2.503.9901
Doesnt work with wire or wireless.

Please help me.

 

Rocinante Wrote:

Delete the 3 "update” folders in C:\program files\SDconnect toolkit (or rename them).. then perform a repair of your SDNetControl by pressing Start\Programs\Service\Setup SDNetControl .. it will start up and ask what you want to do, select repair.. let it do its thing and then go back and delete/rename the update folders in C:\program files\SDconnect toolkit then REBOOT when its done… that should get you up and running.. it is VERY important to REBOOT after deleting the update folders!!!

 

Phingocfeedback:

Thank you verry much! Big Grin that fixed the whole problem.

 

  1. start laptop
  2. Rename update folders
  3. Run setup SdNetControl
  4. The "repair” option wasnt displayed, but it went straight into instalation. No options, but it went automaticaly to instalation :S
  5. Reboot after instalation

Re-delete or Rename update folders after running SDNC setup

  1. Delete setings from the MUX
  2. Reconfigure SDconnect
  3. StartXentry/dasand it worked straight away. Big Grin

Posted by: OBDexpress.co.uk at 09:49 AM | No Comments | Add Comment
Post contains 256 words, total size 3 kb.

SDconnect C4 DAS Fault (1.2)-2.503.9901: Solved & Worked again

Phingocin trouble:

The laptop is a Dell D630 with a chinaSDconnect C4.
Xentry 03/2012
DAS 03/2012

It was all working fine last i used the machine.

So.. I connect the MUX to the car (smart 451), and then the lanwire to the mux and computer. Then i turn on the ignition.

In xentry i choose Smart -> 451 -> Diagnostic -> Das opens
in das: Identify car by control unit. After a few seconds some update thing appears and disappears followed by an error.(see att.) Fault (1.2)-2.503.9901. Cannot connect to car.

DAS-Fault-(1.2)-2.503.9901
Doesnt work with wire or wireless.

Please help me.

 

Rocinante Wrote:

Delete the 3 "update” folders in C:\program files\SDconnect toolkit (or rename them).. then perform a repair of your SDNetControl by pressing Start\Programs\Service\Setup SDNetControl .. it will start up and ask what you want to do, select repair.. let it do its thing and then go back and delete/rename the update folders in C:\program files\SDconnect toolkit then REBOOT when its done… that should get you up and running.. it is VERY important to REBOOT after deleting the update folders!!!

 

Phingocfeedback:

Thank you verry much! Big Grin that fixed the whole problem.

 

  1. start laptop
  2. Rename update folders
  3. Run setup SdNetControl
  4. The "repair” option wasnt displayed, but it went straight into instalation. No options, but it went automaticaly to instalation :S
  5. Reboot after instalation

Re-delete or Rename update folders after running SDNC setup

  1. Delete setings from the MUX
  2. Reconfigure SDconnect
  3. StartXentry/dasand it worked straight away. Big Grin

Posted by: OBDexpress.co.uk at 09:49 AM | No Comments | Add Comment
Post contains 256 words, total size 3 kb.

December 20, 2017

Digiprog 3 Odometer Correction Tool Best Buying Guide

Here goes a long post ofdigiprog3 odometer mileage programmer buyingguide, incl Digiprog 3 for sale(best price), update, manual, review, FAQ, car list...

Welcome!

Part 1: Digiprog 3 for sale


Digiprog-3-V4.94

digiprog-3-v4.94-fix-10

(BEST)Digiprog III Digiprog3 Odometer Master Programmer

Price:€144.00


(CHEAP) Digiprog3 Entire Kit

Price: €135.00

Digiprog 3 Main Unit with OBD2 ST01 ST04 cables

Price: €129(2017 Xmas Sale:€99)

(Main Unit) DIGIPROG III

Price:€99.00

Full Set Cables for Digiprog 3 Odometer Programmer

Price: €79

(Get a free Digiprog 3)Buy 300 tokens for Digimaster 3/CKM100/CKM200

Price:€404.00

ST59 Plug for Digiprog 3 on NEC Cluster Vehicles

Price:€19.99

ST59 Plug works together with DIGIPROG3 odometer correction tool, used on vehicles with NEC chips, like Ford, Renault and so on.

Installation example: Ford NEC

  1. Remove the dashboard and openit .Search ondashthe Soldering Points.
  2. solder on same points as inpicturethe cables from ST59 on it. All Pins must be Lift up From Board
  3. Connect the Cables to ST59 you can nothing make Wrong
  4. Now connect the ST 59 with the Digiprog.
  5. Select the program:cars / trucks- FORD - KA NEC.
  6. The DIGIPROG denotesold / wrongMileage.
  7. Program and completed thenew / correctMileage.


digiprog3 software free download

digiprog3 software download

digiprog3 update download

digiprogupdate

digiprog3 password

digiprog3 manual



Part 2:digiprog3 user manualenglish

digiprog3 download:

Digiprog 3 v4.94 car list.pdf

Digiprog iii v4.94 test ok or fail

How to useDigiprog3ST59 Plug?

More info:http://www.mileageprogrammer.com/category/digiprog-3/


Tips on using Digiprog 3 odometer programmer:

  1. Power-Ondigimaster3 password:1
  2. Digiprog seriesnot supportAUDI A1 A3 Golf 6, if you want to do such model, youcan choose Digimaster 3.
  3. Always connect theEepromto the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
  4. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
  5. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.
  6. Do not connect the device to your laptop, otherwiseyou will get blue screen problem
  7. As most of Cars Need to Open Dashboard and Do the Soldering, you’d better have basic knowledge about mileage correction before order


Part 3:digiprog3 update

DIGIPROG3V4.94Update Software

Price: $49.99

DIGIPROG3V4.88 Update Software

Price: $49.99


Digiprog 3 V4.94 Update Notice:

  1. If Your Serial Number of Digiprog 3 is590C8F0E000024CC65070000AFD68C070000, Can not buy this update file. Please kindly note.
  2. It takes 24 hours to send the update file
  3. Please provide correct serial number and close or uninstall anti-virus software on your laptop, otherwise will cause blue screen
  4. Make sure your computer will not become standby status when updating. Computer power must connect ok. Update willtakes15-20 mins
  5. Please confirm the update file is complete as display below ,or will cause blue screen too

digiprog3-update-file

Digiprog update tips:

Attention please when you update Digiprog3
Video: Digiprog 3 V4.94 software update
D
igiprog 3 CDM 2.08.30 Driver free download

How to update Digiprog 3 software:

1.Connect the USB to the computer, start yourDigiprog 3, run Digiloader1.exe.

digiprog-3-update-1

2.Choose the right port, select Digi1.bin, and Click the button. If your dp3 doesn’t enterblue screen, check your setting and restart from step 1.

digiprog-obd2express-ju-02

3.In upgrading, it should be like this until over.
Attention, it will be damaged if you remove it now.

digiprog-obd2express-ju-03

  1. Upgrade Over. Your Digiprog 3 should restart automatically.

digiprog-obd2express-ju-04

Part 4:digiprog3 not working

Digiprog 3 not working: Mosaic screen

digiprog3-error-1

digiprog3 v4.94 odometer correctionmasterdisplaywith Mosaic as soon as open it up(shown picture below), and it was not working.

digiprog3-error-fix

Solution : ask the vendor for these two chips ofdigiprogiii (marked red picture below) for free and replace the two chips. It will work.

Digiprog 3 not working: white/bluescreen


You may encounter with the Blue/White screen problem ofchinadigiprog3; usually the possible reasons incl:

  1. a) The first and most common cause of blue screen is the inappropriate update Digiprog 3.

We must remember that updates are created for the serial number. The serial number of the update files must = Digiprog 3 serial number. Otherwise, upload the files to another serial number gives us the effect shown in the picture above.

  1. b) Another cause of the blue screen may be interrupted during the upgrade of communication between your computer and your device digiprog3.
  2. c) Other causes unrelated to update the device

And there are two optional solutions here:

digiprog-3-update-3

Solution1: Digiprog3–101W(X1) Solder Operation Way

Cut off theconnectcable on the 5pin pad (note: cut via reverse) Then usemultimeterto test 5pin and R10 which is far away from the point ofX1 end–Ifopen circuitis not ok, then means cut off the connector successfully.

Solder X1 to the pad (note: reverse welding)

Connect the point which is the end of R10 which is far away from 101W(X1) and the cable and X1-2 pin.

digiprog-3-v4.94-fix-1

Take off the fly cable between C30 and X1

Take off the IC on the X1 Replace the IC

Connect the new IC Connect the fly cable as the original situation

Note: the original point of the IC is on the upper left corner, against C30. (Red circled place is chip pic of STC15F: 10W H85330 8AB)

Solution 2: Repair Digiprog3 update failure– a blue / White screen.

To repair the unit we will need:

  • a)Update files with the corresponding serial number = serial number of the device.
  • b)Programmer serial memoryforexample, willem.

Ok, so we begin. We will have 3digiprogundress and get into the PCB, exactly 2 serial memory.

You will see a such a view:

digiprog-3-v4.94-fix-2
Us interested, memory, marked in the picture above. Are respectively a memory U1A and U2A. These are the memories that are 22, feet on one side, which is 44, feet the entire memory. We remove the memory U1A from the plate and put in the programmer.

Load a file content digi1.bin, to memoryU1A.

digiprog-3-v4.94-fix-3

Then again put memory on the board.

Do the same with memoryU2A.Only here to load fileDigi2.bin

digiprog-3-v4.94-fix-4

Then again put memory U2A on the board.

Preferably before each update, do yourself a copy memory dumps U1A and U2A. Then we can go back in case of problems with the update to the old version.

digiprog-3-v4.94-fix-5

U1A = Digi1.bin

U2A = Digi2.bin

Twirl, backdigiprog. After this step, rundigiprog. If everything went well that you will be greeted this image.

Digiprog-3-Mileage-programmer
DigiProg 3 Ram

digiprog-3-v4.94-fix

EEpromDigiprog 3 24C1024

digiprog-3-v4.94-fix-7

The serial number is stored in the file digi1.bin exactly at this point:

digiprog-3-v4.94-fix-8

For example, the serial numbers:

C0BE9E0B0000 = D2 CC D0 16 0F 1A 6F F1

61C828170000 = CE 5B 56 C6 3F 16 8D 14

F6C428170000 = 87 98 FA 4E 3F E0 59 56

668206110000 = 44 5B B6 EB 2A A3 D6 1C

3AC928170000 = CF D5 60 29 93 B3 DA D2

Any change in the file, making it not useful after update, blue screen on digiprog 3.

The problem is probably in the checksums of the files after editing change. Maybe someday will a program that will allow changing the serial number in the file update. Then buy only1 timeupdates and will be able to change the serial number in the file. Those who sell the updates are, surely such a program.

Platine Digiprog 3

digiprog-3-v4.94-fix-9

Digiprog 3 cable pinouts

digiprog-3-v4.94-fix-10

Part 5:digiprog3 questions and answers

have somebody problem with noconectionon every car?... ineed to buy anotherobdcable?

Easy to change plug but if there is still an issue then it could be insidemainunit


What is ST01, ST04 cable used for in the package of Digiprog 3?

It needs to remove chip when you program mileage for some car models. One end of the ST01 cable and ST04 cable clip the chip ,and the other end connect to digiprog3.


Audi A5 2011 year 2.0tdi candigidone this dash viaobd. other placesecu, dsg?

Yeah, ecu, dsgand smart key...

But you will need some special tools for that


Candigiwigydo Mercedesclk270cdi2003?

can do just dash


Inot understand, why guys you need that dongle. All NEC dashboards (except old Peugeot) canmakesby4 wires only. No need solder 14 wires.

Cool need some advice what adapter to use then on a 2009 ford bantam cluster with NEC micro maybeanpdf diagram to assist do you use ST51 perhaps


what you have to do is do the cluster first thencasby OBD, when it asks to connect speedo meter connect it thethecastakes the mileage from the cluster

I used mydigiprogv4.94 on a 2008 mini cooper s tacho was quite easy replaced the chip and then tackled thecas3 unit viaobd- it was just searching and searching eventually stopped with unknown version message I ended up doing thecaswithrosfar- problem sorted takes a lot of stripping when usingrosfaras unit needs to be removed Any suggestions on usingdigiprogcas3obdI used BMW E90 st16 in the menu

.....


Moredigiprogclone questions and answers atdigiprog3forum:

http://www.digital-kaos.co.uk/forums/showthread.php/282850-Digiprog-3-clone-questions-and-answers/


Part 6:digiprog3 review

(BIG THANKS to thedigiuser @Adrian Makaruk)

I boughtDigiprog 3 odometer programmer fromchina, and I'm happyforit now.Very pleased to work with almost models (incl. European, American and Asian cars).


Digiprog is the besthandfsdownlow costtool on the market I do everything from foreigns to domestics with it. Version 4.94 is good at its stability even withclonethe software put into and the way the 4.94 update was prepared and bywho .


Hereiput thedigiprog3 car list in the alphabetical order, better for you to check your model.


Digiprog 3obdok:

Audi a1 works (depending on software number)

Audi a2- obd-ok

Audi a3-repair 999999 in dash withdigiprog

Audi A3 2010 by OBD OK

Audi A3 2002 obd2 is ok

Audi a3-2001- vdo- obdok

Audi a4 2001-2005- obdok

Audi a4 8e b6 2004obdok, use 2 minutes

Audi a4 2007obddash read ok write ok/ ecumake-it viatouranedc16 write 2 times to change.

Audi a4 2009 3.0quattroobdok

Audi a4 2005-2009- obdok

Audi A4 2010 Work

Audi a4 2012obdok and fast
Audi a5 2013obdok
Audi a5-2010- obdok 15 min

Audi a6 c5obd

Audi A6 2002 ok after some effort.
Audi a5 2009 3.2Lobdok 30min

Audi A6, 2009 work OBD, 4-5 minute.

Audi A6 2010 dash viaobd(takes a while to find code but ok)

Audi A8 4.2tdi2008 Dash OBD OK 2min

Audi S3 2002 obd2 is ok
Audi TT 2002 obd2 n8 is ok

Audi q3-2010- obdok 15 min

Audi Q5 2.0tdi 2010 byobd...20-30min
Audi Q7 2012 20 sec byobdwork ok

Audi Q7 2007 --->OBD work

Audi q7-2008- obdok

Audi tthc12 plug ok



BMW I82017 work..unit fromebay

BMW E46 2004 ---> 35080 Clip Work
2001bmwx5(e53)sure ok and also range rover withsamedash.no problem.

have to takedashout and solder onbackofboard.
can use BMW 35080 option.


Corolla verso 2007 ok with luck


Chevrolet Montanaobdok

Chevrolet Cruze 2011obdok

Chevrolet Aveo 2012obdok

Chevrolet Corsaobdok (after unplugging battery for a few secs)

Chevysuburban2007 ok if you disassemble dash and read 95080 usingeeprommenu then calculate manually. Will not do it by OBD. Be sure to include Km or Mi, original mileage, desired mileage and hours.


Ford transit 93c76eepromok

Ford fusionhc12 plug ok

Fordmondeo2008- ondok

Ford focus hc11-ok with plug

Ford focus 2006obdok
Ford focus 2004-2010obdok

Ford s-max 2009obdok
Ford Fiesta 2012OBD OK (fiesta 2005obdnot ok)

Fordfiesta2008-2010 red screenobdok

Ford Fiesta HCS12 ---> ST48 Work

FordMondeo2008 Full Colour Fis 24C16 - - - OBD diagRead - 0km ,Write - OK!

Fordmondeo2010visteondash with 9s12 read ok write ok via 4 wires onpcb

fordmondeo2004 st51 read ok/write ok

Ford Bantam 2006 neednecprogrammer

Ford connect 2008obdnot! fvdiobd, read km but not change! dp3 ,conector48, 9S12read and write km!


Fiatducato2014obddash ok (ecu95640) butnyo2015suport


Galaxy 2008 new model by the OBD ok


Hondacrv2002 dash (68hc912)

Honda civic ep3 type r 2002eepromOK


Hyundai I10 (No connection i10 mcs12hy64 to digiprog ....if its 24c08 use plug 1)

Hyundai Terracan w nec, adapter st59, 100% ok, working


insignia 2011obdok 1min
Land Rover Discovery 4 24c16 tacho - ok
Range Rover sport 2010 24c16 tacho - ok

Range Roverevoque2013 viaobdok


Mazda b2500 - b2900 ok


Mercedes w204 c250 2011obdok (Just put through asezs, it will block sync and do dash)

Mercedes w211 2005 dash via st60 read ok/write ok/ ezssync blocked ok
Mercedes w210obd

Mercedes w211 and doobd

Mercedes w219 works as w211 just flashes dashobd

Mercedes W251 R350 2010 ok OBD(no sync problems no can filter needed)

Mercedes class B W246 use direct in OBD

Mercedesvito638 2003 OBD ok

Mercedes W211. Cluster is no problem via OBD. For EZS, need a cable called HC12.
Mitsubishigalant2006 93C46 ok


Nissannavara,pathfindermotorolaST48 by points OK

2011 Nissanmicra1.5tekna93c66eepromuse honda accord c66 option ondigiprogsamealgoby desoldering and using clip st01 to read and write no need to remove needles chip onbackofboard


Opel Vivaro 2013 ---> EEPROM Clip work 93c76

Opel Astra H ---> 35080 Clip Work

Opelastrah 2006 - m35080 - work

Opel Astra 2000obdok

Opel insignia 2013obd--OK

Opel Insignia 2014 ---> OBD Workperfect

Opel Corsa, thedigiprogworking.

Opel Corsa c andastrag. Read and out new mileage in. When press tick, hold trip button andofometerwill flash. Whendigisays check value, release button and disconnect battery for 10sec--> Job done


Peugeot 307 2002 ---> Work, Dash ---> NEC (New ST59), BSI ---> HC12

Porsche panamera 2014 by eeprom 95640 work ok


Saab 9-3 2009 HCS12 ok
Seat MII 2013 ---> OBD Work


Skoda Superb (3t) II 2009y only byobdlessthen5min

Skodaoctavia2009 1.9tdi instrument ok, ecuok, dsgreset ok

Skoda Octavia 2010Y 1.6TDI cluster viaobd
Skoda Octavia 1z 2011 OBD ok

Skoda Fabia MK2 2009 diag no problem

SKODA Fabia 2009obdok.

Skoda Roomster 2009 ---> Diag work Perfect


Toyotayaris(2011), remove and clean chip to read/write, need luck

have to look first whicheepromon circuit my experience with sometoyotathat they use a small 93C46 wich is notinthe menu


Volvo xc90 2007 dash ok by soldering

Volvo xc60 2009obdok
Vauxhalls Vivaro2011... 93c76 ....All good... read and write ..

93c76 option not available under Renault Traffic so use Vivaro or maybe try Renault Master as has 93c76 option that seems as though it would work, have not tried, read ok but didn'tiwrite chip...

Volkswagen Eos obd2 ------ok

vw eos 2007 ---> Diag obd2 work
vw polo, seat ibiza 2007 magenti marelli motorola ST48 by points OK
vw polo 2001-2005 vdo obd ok

vw polo trw plug ok

Vw fox 2007 hc912 by solder point and ST48 work

Vw touareg 2004 obd ok

Vw Tourag 2013... read ok but write failed

VW Tiguan 2007 ---> OBD OK

vw tiguan 2010-2011 OBD ok

Vw AMAROK 2012 obd ok 1 min

vw bora all obd ok

vw jetta all obd ok

vw jetta 2012 work obd

vw t5 obd ok

vw t5 ecu edc 16 ok 50%50

vw touram dash obd ok

Vw Golf 4 BOO via OBD ok and Audi a4 boo crypto too
all Golf 4 withoutproblem!!!

VwGolf 5plus byobd- visteondash read ok write ok

VwGolf 6 plus 2010 work ok
vwGolf MK6 2012 works OK

all golf 6 work goodtill2013year

VwPassat 2013obd..ok

Vwpassat2007obdok
Vwpassat2008 viaobd-dash read ok write ok/ ecuread ok write ok 5 min.

VwPassat CC 2.0tdi 2010y done byobd

Vwpassat2006tdidash &ecuobdOK

Vwpassat2001-2011obdok

Vwpassat2011 workobd5 min
Vwpassat2012 workobd
Vwpassatcc 2012 workobd
VwPassat b5 2003tdiall ok


reads 9s12mcuwith cables 48 and 51


Complicated with the EPROM of Peugeot 508 2012...

Needopen dashboard, and Bsi.
Peugeot 508haveeproms. 95080 and 95256.
Read them, then put them here




Cars that Digiprog 3 FAILED to do:

Audi A3 2014 dash8V , obdnot connect


BMW X1 2013 failed... nobmwafter 2002 can go byobd... have to program the 35160 chip inclusterand the cas4 (or fem?) module.

or cluster + can filter cable behind cluster to blockcas. butdigiprogcan't program 35160


BMW 325 e90 or x5 e53 no luck withdigiprogvia obd2. Cas3 just says no connection or just give mea 1349652 mileswhich is wrong.


GMCyukon2001 cannot do viaobd


Hyundai I10 9S12HY64 cannot work... Digipro can’t read D flashmemory ,so it cannot read and write this kind ofmculike Hyundaieon ,Hyundaii10 so use UPA USB can do it.


Chevrolet Cruze 2012obddid n't work. remove BCM next to left foot passenger seat you'll find 24c16 ok


Mercedes W245digiprogcan’tdobyobd.
use cluster plug or program chip.
first set to 999999km. then install cluster and put the caroncontact for 1minute. then program cluster to any value.
It’s the same for w169


Mercedes Sprinter 906 need to programezs(cannot withdigi ,but Xprog, R270 programmer working no issues)
or use can filter. (yes they exist)


Nissanpathfinder2000 c56eeprom, cannot read. Had to do it with TU. Very disappointcouldntdo no 9s12 withdigiprog.


Opelastrag, corsa c, zafiraa, never have success to do withdigiprogbyobd


Opel insignia 2010obdnot work.


VW polo 2012 johnson controlnec95320 kill checksum dashboard error ... (x-tool or another good tool can fix it)


VW Golf 6 2013 OBD NOT OK


Volvo xc60obd2013 won't go. Only does till 2010


Note: for models with no luck, perhapsobdstarx300mis a good choice. Anyone can try it.ido n’t have this)



Part 7:digiprog3 car list

Here is the digiprog 3 4.94 car list:

Alfa 145

Alfa 146

Alfa 147

Alfa 156 HC11

Alfa 156 M2002 Programming Via Micro

Alfa 159

Alfa 159 c86

Alfa 164

Alfa 166 Model 2002 Programming Via Micro

Alfa 166M 2002

Alfa Brera c86

Alfa Mito 24C16

Alfa Spider / GTV

Altea 2009

Aprilia Cycle Factory 2005

Aston Martin DB7 Programming Via Micro

Aston Martin DB9 Program via cluster

Aston Martin Gallardo

Aston Martin Vanquish Programming Via Micro

Aston Martin Zagato Programming Via Micro

Audi 2006

Audi A2/3/4/6 VDO 07/01 Diagnostic

Audi A2/3/4/6 VDO 07/01- Diagnostic

Audi A2/3/4/6 VDO To 2011

Audi A3

Audi A3 2006

Audi A3 A8 2003 on Service & Navigation

Audi A3 A8 2003 on Service & Navigation Diagnostic

Audi A3 Cabrio

Audi A3 New Versions

Audi A3 UKNSI Programmind Via Chip

Audi A3 more versions ( lowline)

Audi A3 to 06/01 Diagnosis

Audi A3/A8

Audi A3/A8 2005-

Audi A3/TT/R8

Audi A4

Audi A4 2001

Audi A4 2001-2005 RB4 Encryption

Audi A4 2007-

Audi A4 Bosch

Audi A4 Bosch 2002 Diagnostic

Audi A4 Bosch All Models

Audi A4 Modell 2001 Bosch Diagnostic

Audi A4 RB4 -2005

Audi A4 RB4 Airbaglamp repair (diag)

Audi A4 RB8 -2007

Audi A4 RB8 2005

Audi A4 UKNSI Programmind Via Chip

Audi A4 s

Audi A4/A5 2007

Audi A4/A5 2008

Audi A4/A5 –bis V2.55

Audi A4/A5/Q7 95320

Audi A5

Audi A5 09/2007-

Audi A6/Q7 2008- 95320

Audi A8 - Up tp Present year

Audi A8 / S8 up 02/99

Audi A8 24C16

Audi A8 All models

Audi A8 VDO 2002

Audi A8 to 01/99 Diagnosis

Audi A8 to 2011

Audi Audi A2/A3/A5/ A6/A7/ A8 /R8/ Up To 2011

Audi Audi A3/ A6/ A8 2006 on Diagnostic

Audi Jaeger/Magneti Marelli up 04/99

Audi Jaeger/Magneti Marelli up 04/99 Diagnosis

Audi MM 4/99

Audi MM 4/99 Diagnosis

Audi MM4/99 HC12 Programming Via Micro

Audi Magnetti Marelli All models Diagnostic

Audi Q5

Audi Q7

Audi Q7 2009

Audi Q7 bis V01.44

Audi R8

Audi R8 new verison

Audi S3

Audi TT

Audi TT

Audi TT Diagnosis

Audi TT Up to 2011

BMW (Z4) LKM HCS12X

BMW 1er / E81/E82/E87/E88 CAS3

BMW 3 Series E46 2000 35080

BMW 3 Series E46 Bosch 35080

BMW 3er / Compact / Z3 Cluster-Diagnosis

BMW 3er / Compact / Z3 up 98 Cluster-Diagnosis

BMW 3er / E36 Diagnosis

BMW 3er / E36 Modell 99 Cluster-Diagnosis

BMW 3er / E46 1999/2000 Diagnostic

BMW 3er / E46 Lightmodule HC11

BMW 3er / E90/E93 CAS3

BMW 5er / 60/E61 CAS3

BMW 5er / E34

BMW 5er / E39 up 05/99

BMW 5er / E39 with BC to 04/99 Diagnosis

BMW 5er / E39 without BC to 04/99 Diagnosis

BMW 6er

BMW 6er / E63/E64 CAS3

BMW 7er / E32

BMW 7er / E38 (SW 12/13) up 05/99 Cluster-Diagnosis

BMW 7er / E38 (SW 14) up 05/99

BMW 7er / E38 to 04/99 Diagnosis

BMW 7er up 10/01 Only in our Office / In progress

BMW 8er / E31 Diagnosis

BMW All CAS Units Send to office

BMW CAS2

BMW CAS2,3,3X /PLUG

BMW CAS2,CAS3 HCS12

BMW CAS3 HCS12X

BMW Cas 3

BMW E38

BMW E39

BMW E39 LCM Diagnostic

BMW E39 Light Module All models Diagnostic

BMW E46 2001/ Light Module HC12 Diagnostic

BMW E46 2003/ Light Module HC12S Diagnostic

BMW E46 LCM Diagnostic

BMW E50 5 Series 2004 Diagnostic

BMW E60 & E65 E90 2004 2007 CAS Diagnostic

BMW E65 CAS

BMW E65 CAS HC12 + HCS12

BMW EWS4 HCS12

BMW F20 F30

BMW F650GS

BMW Key Module & LCM all models Progarmming Via EWS

BMW LCM

BMW LCM

BMW Lcm

BMW Still R70

BMW X1

BMW X3 & EWS LCM Diag

BMW X3 LCM Diagnostic

BMW X5

BMW X5 (SW 14 High)

BMW X5 EWS & Key Programming Via EWS

BMW X5 EWS4 HCS12

BMW X5 LCM Diagnostic

BMW X5 Light module Diagnostic

BMW X5 Light module HS12 Diagnostic

BMW X5er / E70 CAS3

BMW X6

BMW X6er / E71 CAS3

BMW Z4

BMW Z4 lcm

BMW Z8

Bentley Continental

Bentley Continental GT 2003 / Diagnostic

Bentley Continental GT ALL 2003/ 2011

Bentley Continetal Program Via Chip

Bentley GT 2007-

Bentley GT 2007-

CRYSLER PT CRUISER 2007-

Cadillac Escalade 95020

Cagiva Raptor 1000

Chevrolet Alero

Chevrolet Avalanche Programming Via Micro

Chevrolet Balzer

Chevrolet Camaro

Chevrolet Captiva

Chevrolet Corvette

Chevrolet Corvette Programing Via Chip

Chevrolet Cruze

Chevrolet Epica

Chevrolet Escalade

Chevrolet HHR BCM 25080

Chevrolet Kalos 2009 C56, Aveo C56

Chevrolet Matiz

ChevroletTahoe

ChevroletTrail Blazer 95020

Chrysler (Plymouth) Prowler

Chrysler 300 HC12 Programming Via Micro

Chrysler 300M

Chrysler 300c

Chrysler 300c HC12

Chrysler All Models

Chrysler All Models Diagnostic

Chrysler Cherokee Modell 2002

Chrysler Cherokee Modell 2002 Diagnostic

Chrysler Cherokee to Chip 56

Chrysler Crossfire

Chrysler Crossfire Diagnostic

Chrysler Grand Cherokee

Chrysler Grand Cherokee 04/99

Chrysler Grand Cherokee 04/99 Diagnostic

Chrysler Grand Cherokee C86 Program via chip

Chrysler Grand Cherokee HC12

Chrysler Grand Cherokee HC12 Diagnostic

Chrysler Grand Cherokee to 03/99

Chrysler Grand Cherokee to 03/99 Diagnosis

Chrysler Le Baron Only in our Office / In progress

Chrysler Neon HC12

Chrysler PROWLER

Chrysler PT Cruiser -2007

Chrysler PT Cruiser HC12 Diagnostic

Chrysler PT Cruiser to 2007-

Chrysler PT Cruiser to HC11 Diagnoctic

Chrysler Pacifica HCS12

Chrysler Seebring HC12 Programming via Cluster

Chrysler Stratus

Chrysler Stratus Diagnosis

Chrysler Voyager Modell 2002 HC12 Cluster-Diagnosis

Chrysler Voyager to Bj. 2001

Chrysler Voyager to Bj. 2001 Diagnosis

Chrysler Wrangler

Chrysler Wrangler HC11 Programming via Micro

Citreon C3 Programming Via Tacho & Box

Citreon C5 2003s

Citreon C5 Programming Via Box & Cluster

Citreon C8 Programming Via Tacho & BSI

Citreon New Saxo Diagnostic

Citreon Picasso NEC Tacho & Box Via Micro & Chip

Citreon Relay Van Chip 95040

Citreon Xsara 2000/2002 NECs BSI & Tacho

Citroen Berlingo 2003/2004 Programming Via cluster & BSI

Citroen Berlingo 2004 Cluster BSI

Citroen Berlingo BSI

Citroen Berlingo HC08 Tacho Programming Via Micro

Citroen C2

Citroen C3

Citroen C3 MJ2010

Citroen C3/DS3 new versions

Citroen C4

Citroen C4 C66 & BSI 95128

Citroen C4 Picasso Tacho c66

Citroen C4 Picasso bsi 95128 2006-2009 autodet

Citroen C5

Citroen C5 C76

Citroen C5 New software Programming Via Cluster & BCM

Citroen C8 Programming Via Tacho & BSI

Citroen DS3 93C66 new versions & DS4 24C16

Citroen Evasion

Citroen Nemo

Citroen Picasso

Citroen Picasso BSI

Citroen Relay

Citroen Relay

Citroen Xantia

Citroen Xara Picasso

Citroen Xsara

Citroen Xsara

Citroen Xsara Programming Via BCU & Tacho

Citroen/Peugeot bsi autodetect

Crysler Grand Cherokee C86

Crysler PT Cruiser 2007

Crysler Wrangler 2004

DODGE MAGNUM

Dacia Sandero 93C56

Daewoo Lacciti

Daihatsu Sirion

Dodge Avenger HCS12

Dodge Caravan

Dodge Caravan 2007-

Dodge Caravan HCS12

Dodge Challenger

Dodge Charger 24C16

Dodge Durango

Dodge Journey

Dodge Magnum

Dodge Nitro

Dodge Ram 2003

Dodge Ram 2003 Diagnostic

Dodge Ram 2003-2006

Doge Magnum

FORD C-MAX ,S12

FORD EXPLORER S12

FORD FIESTA (-2009)

FORD FOCUS 2004- s12,s12x

FORD FUSION S12

FORD MAVERICK/EXPLORER 2007-

FORD MONDEO 2008-,SMAX,GALAXY 2006-

FORD MUSTANG (7R33)

FORD Smax/Mondeo/Galaxy s

FREELANDER 2008- DASH/BCU

Fabia/Polo 2007

Ferrari 430

Ferrari 430 Program via chip

Ferrari 458/California Diag

Ferrari 550M

Ferrari 599

Ferrari ENZO Scagletti

Ferrari Enzo

Ferrari F50

Ferrari F50 Only in our Office / In progress

Ferrari F650

Ferrari Modena 360

Ferrari Scaglietti

Ferrari Stradale

Fiat 500

Fiat 500 Tacho 95080/ECU 95320

Fiat Brava ST Cluster-Diagnosis

Fiat Bravo -2007

Fiat Bravo 2005-2007

Fiat Bravo MM08 Programming Via Micro

Fiat Bravo NS56 Programming Via Micro

Fiat Croma -2007

Fiat Croma 2005-2007

Fiat Daily VDO

Fiat Doblo -2006

Fiat Doblo -2007

Fiat Doblo EDC16 95640

Fiat Ducato

Fiat Ducato -2007

Fiat Ducato 2.8jtd

Fiat Ducato M2002 NEC

Fiat Duplo Model 2002

Fiat Fiorino 95080/ECU95320 Ducato/Punto 95160

Fiat Idea -2007

Fiat Idea -2007

Fiat Iveco Daily

Fiat Marea 2004

Fiat Marea 2004 Programming via Micro

Fiat Marea HC11 Programming Via Micro

Fiat Multipla

Fiat Multipla Cluster-Diagnosis

Fiat Multipla M2002 C56

Fiat Panda

Fiat Panda -2007

Fiat Panda -2007

Fiat Panda Chip 95040 Program via chip

Fiat Punto -2007

Fiat Punto 200-2006

Fiat Punto 2002 NEC

Fiat Punto Jeager 08 Cluster-Diagnosis

Fiat Punto/Doblo 95040

Fiat Scudo

Fiat Scudo Tacho und Box

Fiat Scudo bsi 95128

Fiat Scudo dash 95020

Fiat Sedici

Fiat Seicento

Fiat Stilo

Fiat Stilo Programming Via Micro

Fiat Ulysee 2004 Programming Via Tacho & BSI

Fiat Ulysse Programmin Via Micro

Ford Bantam

Ford Calaxy -2006

Ford Calaxy 2006-

Ford Cmax

Ford Connect

Ford Connect Programming Via Micro

Ford Cougar Cluster-Diagnosis

Ford Edge

Ford Escape 2007-

Ford Escape Hybrid HCS12

Ford Explorer

Ford Explorer 2003 Programming Via Micro

Ford Explorer Programming Via Micro

Ford F-Series

Ford F150 2004 Programming Via Micro

Ford F150 HC11 Programming Via Micro

Ford F150 HCS12

Ford F250

Ford F250 HC12 Programming Via Micro

Ford F350 Program Via Cluster

Ford F450

Ford Feista 2003

Ford Feista 9S12 2006 model Programming Via BDM

Ford Fiesta 2001-2008

Ford Fiesta 2008 hcs12

Ford Fiesta 2008-

Ford Fiesta 2009

Ford Fiesta Cluster-Diagnosis

Ford Fiesta KA

Ford Figo

Ford Focus 2003 Chp & Micro all models Programmin Via chip Or BDM Points

Ford Focus 2004-

Ford Focus 2008

Ford Focus Cluster-Diagnosis

Ford Focus/Cmax

Ford Freestar

Ford Fusion

Ford Fusion Progarmming Via Chip

Ford GT 24c08

Ford Galaxy 2000/2006 Diagnosis

Ford Galaxy Diagnosis

Ford Kuga

Ford Maverick 2007-

Ford Maverick HC11 Programming Via Micro

Ford Mondeo 2008-

Ford Mondeo Cluster-Diagnosis

Ford Mondeo/Galaxy/Smax

Ford Mustang

Ford Mustang

Ford Mustang 2007-

Ford Mustang 24C32

Ford Mustang Programming Via Micro

Ford Puma Cluster-Diagnosis

Ford Ranger 2007

Ford Ranger 24C16

Ford Ranger Programming Via Cluster

Ford SMAX

Ford Scorpio Cluster-Diagnosis

Ford Smax

Ford Tarus 2003/ Only in our office

Ford Territory

Ford Thunderbird 2005/ 2006 model Programming Via BDM

Ford Thunderbird HC11

Ford Transit

Ford Transit 2003

Ford Transit 2004 Programming Via Micro

Ford Transit Model 2003

Ford Transit TVI Chip 66 Progarmming Via Chip

Ford VAN F150

Ford Windstar HC11 Programming Via Micro

Ford s

GM Cadillac

GM Cadillac 2003

GM Cadillac Seville STS

GM Cadillac Seville STS HC 11 Cluster-Diagnosis

GM Chevrolet Lacetti

GM Corvette Chip 93C76

GM Corvette c76

GM Hummer

GM Hummer 2006 Programming via Tacho & Box

GM Hummer H3

GM Hummer Klms & Hours

GM Seville HC11 Programming Via Micro

GM Trans Sport HC12 Programming Via Micro

GM Transport M99 Programming Via Micro

GMC Savana 95P02 KM/HOURS

Golf Plus 2009

Golf5

Golf5 2008 v09.00 24c32

HARLEY Davidson Buel

HC12 HCS12 new Plug

Harley V-Rod

Hexeditor HC08, HC12, HCS12

Honda Accord

Honda Accord 2008 C86

Honda Accord Type R

Honda CBR 1000RR

Honda CBR400

Honda CRV

Honda CRV 2004 Chip 56

Honda CRV Chip 93C56

Honda CRV HC12 Programming Via PCB

Honda Civic

Honda Civic 2006

Honda Cr-Z

Honda Goldwing

Honda HRV

Honda Jazz

Honda Jazz

Honda Legend

Honda Legend C66

Honda Logo

Honda S 2000

Honda S 2000 c66

Honda Shutle

Honda Sorento

Honda Stream

Honda VFR 800 93C46

Honda cbr 400

Honda cbr 600 sport

Hummer H2 2007- (95080)

Hummer Miles & Hours

Hyundai Accend,

Hyundai Coupe Ch 46

Hyundai Elantra

Hyundai Getz

Hyundai IX55

Hyundai Ix35

Hyundai Matrix Ch 46

Hyundai Sante Fe Ch56

Hyundai Sonata

Hyundai Sonata C86

Hyundai Terracan 2006

Hyundai XG 30 Ch 46

Hyundia Accent

Insignia 24C16 (BSI)

Isuzu Panther

Isuzu Rodeo C56

Isuzu Trooper

JEEP CHEROKEE 2008- C76

Jaguar Daimler to 12/97 Cluster-Diagnosis

Jaguar Daimler up 01/98 Cluster-Diagnosis

Jaguar S Type 2005

Jaguar S Type 2005 Program Via Cluster

Jaguar S Type HC12 Programming Via PCB

Jaguar S-Type 2002 HC12 Programming via Micro

Jaguar S-Type to 09/01 Programming via Micro

Jaguar S-Type up 10/01 Programming via Micro

Jaguar XF 24C64

Jaguar XJ 350 Programming Via Micro

Jaguar XK8

Jaguar XK8 Programming via Micro

Jaguar Xtype HC12 Programming Via PCB

Jeep Cherokee 2007-2008

Jeep Cherokee 2008-

Jeep Commander

Jeep Compass

Jeep Grand Cherokee 2005 - PRESENT YEAR

Jeep Grand Cherokee 2005-

Jeep Patriot

Jeep Patriot

Jeep Ratriot

Jeep Wrangler

Jeep Wrangler 2007-

Kawasaki Cycle ZXR 636

Kawasaki GPZ 600 93C46

Kawasaki ZX9 93C46

Kawasaki ZZR 1400

Kawasaki zx6r

Kia Carens

Kia Carens C46 new version

Kia Carnival

Kia Ceed 24C16

Kia Mentor C46

Kia Picanto

Kia Sorrento

LDV Convoy Van

Lambogini Murcielago

Lamborghini Gallardo

Lancia Lybra

Lancia Musa 2006/2007

Lancia Thesis

Lancia Y

Lancia Z

Landrover Discovery 35080

Landrover Evoque 93C76

Landrover Freelander

Lexus GS 450h c46

Lexus LS 200

Lexus LS 300

Lexus LS 400

Lexus LS 430

Lexus RX300

Lincoln Navigator

Lincoln Navigator 2003 Programming Via Micro

Lincoln Towncar hcs12

Lotus Elise

Lotus Elise HC11 Programming Via Micro

Lotus Exige S hcs12

MAZDA TRIBUTE 2007-

MERCURY MARINER 2007-

MINI Cooper CAS 2007-

MINI DASH HC12

Maserati Gran Turismo

Maserati Quattroporte

Maserati Quattroporte 2005/2006

Mazda 2

Mazda 3

Mazda 3 C66

Mazda 323

Mazda 5

Mazda 6

Mazda 626

Mazda 626 2003

Mazda BT50

Mazda CX7

Mazda MPV

Mazda MX5

Mazda Premecy

Mazda RX 8

Mazda RX7

Mazda RX8 Programming Via Tacho

Mazda TRIBUTE HC11 Programming Via Micro

Mercedes 300C Programming Via Micro

Mercedes A-Class 2012 (W176)

Mercedes A-Class Diagnosis

Mercedes Benz Crafter/Sprinter EZS new versions

Mercedes C-Class (W202) Diagnosis

Mercedes C-Class (W203) 07/003 Diagnosis

Mercedes C-Class (W204) Assyst / CLR error

Mercedes C-Class EZS(W204) 07/2007-

Mercedes C-Class Tacho(W203) 07/2004-

Mercedes C-Class Tacho(W204) 07/2007-

Mercedes C/Class (W203) 07/2003 Diagnostic Via cluster

Mercedes C/Class (W203) 2001/2002 Diagnostic Via cluster

Mercedes CL-Class (W216) Assyst / CLR error

Mercedes CL-Class EZS(W216)

Mercedes CL-Class Tacho(W216)

Mercedes CLK / SLK to 03/99 Diagnosis

Mercedes CLK / SLK up 04/99 Diagnosis

Mercedes CLS-Class (W21 Assyst / CLR error

Mercedes CLS-Class (W219) Assyst / CLR error

Mercedes CLS-Class EZS(W21 2011-

Mercedes CLS-Class EZS(W219) -2011

Mercedes CLS-Class Tacho(W21 2011-

Mercedes CLS-Class Tacho(W219) -2011

Mercedes Crysler W209

Mercedes E-Cabrio (A207) Assyst / CLR error

Mercedes E-Cabrio EZS(A207)

Mercedes E-Cabrio Tacho(A207)

Mercedes E-Class (W212) Assyst / CLR error

Mercedes E-Class EZS(W212) 07/2007-

Mercedes E-Class Tacho(W209)

Mercedes E-Class Tacho(W211) 07/2004-

Mercedes E-Class Tacho(W212) 07/2007-

Mercedes E-Class to 03/99 Diagnosis

Mercedes E-Class up 04/99 Diagnosis

Mercedes E-Coupe (W207) Assyst / CLR error

Mercedes E-Coupe EZS(W207)

Mercedes E-Coupe Tacho(W207)

Mercedes Fehlerspeicher

Mercedes G Class Programmingg Via Box

Mercedes G-Class to 03/99 Diagnosis

Mercedes G-Class up 04/99 to 07/01 Diagnosis

Mercedes G-Class up 08/01 Diagnosis

Mercedes GKL-Class (X204) Assyst / CLR error

Mercedes GL-Class (X164) Assyst / CLR error

Mercedes GL-Class EZS(X164)

Mercedes GL-Class Tacho(X164)

Mercedes GLK-Class EZS(X204)

Mercedes GLK-Class Tacho(X204)

Mercedes M-Class to 03/99 Diagnosis

Mercedes M-Class up 04/99 to 07/01 Diagnosis

Mercedes M-Class up 08/01 Diagnosis

Mercedes ML

Mercedes ML W164 EZS

Mercedes ML-Class (W164) Assyst / CLR error

Mercedes ML-Class EZS(W164)

Mercedes ML-Class Tacho(W164)

Mercedes R-Class Tacho(W251)

Mercedes R172 SLK

Mercedes R197

Mercedes R230

Mercedes R230 Diag 2005-

Mercedes S-Class (W220 ) up 06/02 & Key

Mercedes S-Class (W220) to 05/01

Mercedes S-Class (W221) Assyst / CLR error

Mercedes S-Class Diagnosis

Mercedes S-Class EZS(W221) 07/2005-

Mercedes S-Class Tacho(W221) 07/2005-

Mercedes S220/R230 EZS

Mercedes SL 2002

Mercedes SL 2012 (R231)

Mercedes SL-Class (R230)

Mercedes SL-Class R129 Diagnosis

Mercedes SL-Class R130

Mercedes SLK

Mercedes SLK-Class Tacho(R171)

Mercedes Smart 2004 Programming Via Tacho & BSI

Mercedes Sprinter 2006

Mercedes Sprinter Cluster-Diagnosis

Mercedes Sprinter Modell 2000

Mercedes V-Class / Magneti Marelli Diagnosis

Mercedes V-Class VDO Cluster-Diagnosis

Mercedes Vaneo Programming Via Cluster

Mercedes Viano

Mercedes Vito / Viano HCS12

Mercedes Vito VDO Cluster-Diagnosis

Mercedes Vito Vaneo Model 2003 on Programming Via Tacho & Key module

Mercedes W164 SW94, SW93

Mercedes W164, R171, W211 Tacho

Mercedes W169

Mercedes W203

Mercedes W203

Mercedes W203 W211 Key module HC12S Only in our office

Mercedes W204

Mercedes W204 Cluster

Mercedes W204 new version diag

Mercedes W209 CLK / SLK up tp 08/03 Diagnostic

Mercedes W211

Mercedes W211 2004 Key & Gateway Only in our office

Mercedes W211 2004 Service Assyst Only in our office

Mercedes W211 E Class SW 77 Diagnostic

Mercedes W211 E Class up to Sept 2003 Diagnostic

Mercedes W212

Mercedes W212 chip, x204 (GLK) Chip

Mercedes W218

Mercedes W245

Mercedes W251 (R-Class)

Mitsubish Lancer new version

Mitsubishi Canter

Mitsubishi Carisma

Mitsubishi Colt

Mitsubishi Eclipse

Mitsubishi Galant

Mitsubishi Grandis

Mitsubishi L20

Mitsubishi Lancer

Mitsubishi Outlander

Mitsubishi PININ Ch 46

Mitsubishi Pajero

Mitsubishi Pajero

Mitsubishi Shogun Ch 56

Mitsubishi Space Gear

Mitsubishi Space Runner

Mitsubishi Space Star

Mitsubishi Space Wagon

Motor Cycles

Mustang 2005

NEC Hexeditor

Nisan Qashqai 2011 HCS12 370Z C86

Nissan Almera 93C46/C56/C66

Nissan Armada

Nissan Cabstar

Nissan Chip en

Nissan Infinity

Nissan Interstar

Nissan Maxima

Nissan Micra

Nissan Navaro

Nissan Note

Nissan Pathfinder

Nissan Pathfinder HC12S Program Via Cluster

Nissan Pathfinder HCS12X new version

Nissan Patrol

Nissan Pick Up

Nissan Primastar

Nissan Primera

Nissan Primera 2004

Nissan Primera 93C56/ C66

Nissan Qashqai

Nissan Qashqai HCS12X new version

Nissan Skyline R34

Nissan Skyline R35 & GT350

Nissan Skyline R35 350GT

Nissan Terrano II Cluster-Diagnosis

Nissan Tino

Nissan Xtrail

Nissan Xtrail C66

Nissan Xtrail c66

OPEL VECTRA

OPEL ZAFIRA

Opel Antara

Opel Astra

Opel Astra 2009-

Opel Astra Diagnosis

Opel Astra ECU 95160

Opel Corsa

Opel Corsa 35080

Opel Corsa Diagnosis.

Opel ECU MJD 95320 (Astra/Meriva 1.3JTD)

Opel Frontera

Opel GT V2, Tigra

Opel Insignia

Opel MJD

Opel Meriva

Opel Montery

Opel Movano

Opel Movano 2004

Opel Movano Sagem NEC78K

Opel Signum

Opel Tigra

Opel Vectra 04/99

Opel Vectra 04/99 Diagnosis

Opel Vectra 2003/2007

Opel Vectra to 03/99

Opel Vectra to 03/99 Diagnosis

Opel Vivaro

Opel Vivaro 66

Opel Vivaro M2002 NEC

Opel Zafira

Opel Zafira 2003./2007 Diagnostic

Opel Zafira 2003/2007

Opel Zafira Diagnosis

Passat B6

Peugeot 106 Diagnostic

Peugeot 206 Jaeger Programming Via Micro

Peugeot 206 M2002 NEC All new models

Peugeot 207

Peugeot 3008

Peugeot 306 VDO Cluster-Diagnosis

Peugeot 307

Peugeot 307 BSI

Peugeot 307 Chip Programming Via Box & Tacho

Peugeot 307 HC12 Programming Via Micros

Peugeot 308

Peugeot 4007 C86

Peugeot 406 BSI

Peugeot 406 Jaeger Programming Via Micro

Peugeot 406 Sagem

Peugeot 406 VDO 2000/2001 Cluster + BCU

Peugeot 406 VDO Cluster-Diagnosis

Peugeot 406 Valeo Box Programming Via Box & Cluster

Peugeot 406 box

Peugeot 407 Programming Via Tacho & BSI

Peugeot 508

Peugeot 607 VDO Programmingg Via Box + Cluster

Peugeot 607 c66

Peugeot 806 Jaeger / Magneti Marelli Programming Via Micro

Peugeot 807 Programming Via Tacho & BSI

Peugeot BOXER

Peugeot Boxer

Peugeot E7

Peugeot Partner

Peugeot/Citroen BSI 24C128

Peugoet 206 Box

Peugoet 307

Polo/Fabia/Roomster 2007

Pontiac Solstice

Porsche 911 (996)

Porsche 911 (996)Turbo

Porsche 928

Porsche 987

Porsche 996 09/01/2000 Diagnostic

Porsche 996 2000/2002 BCU Programming Via Box

Porsche 996 Turbo Ready Soon

Porsche 996 to 08/01 Diagnosis

Porsche 996 up 09/01 93C86 Diagnostic

Porsche 997

Porsche 997 MCU Program via chip

Porsche 997 Tacho & MCUs

Porsche Boxster (9686/987)

Porsche Boxster Diagnosis

Porsche Cayenne 2002-2010

Porsche Cayenne 2010 - to PRESENT YEAR

Porsche Cayenne Diagnostic

Porsche Cayman (987)

Porsche Cheyenne

Porsche Panamera

Punto/Idea

RENAULT TWINGO 2008 c66

Range Rover 2006

RangeRover c86

Renault Clio

Renault Clio 2004

Renault Clio Jaeger / Magneti Marelli Programming Via Micro

Renault Clio M2002 NEC

Renault Clio Sagem

Renault Espace

Renault Espace Model 2004 Programming Via Tacho & BSI

Renault Espace to 01/99 Only in our Office / In progress

Renault Espace up 02/99 Programming Via Micro

Renault Espace up 2003 Ch 56

Renault Kangoo

Renault Laguna

Renault Laguna HC12 Programming Via Micro

Renault Laguna Jaeger

Renault Laguna MM08 Programming Via Micro

Renault Laguna ST Micro Programming Via Micro

Renault Laguna Sagem

Renault Magane

Renault Master

Renault Megane

Renault Megane Jaeger / Magneti Marelli Programming Via Micro

Renault Megane Sagem to 09/99

Renault Megane Sagem up 10/99 Only in our Office / In progress

Renault Megane Senic Sagem Only in our Office / In progress

Renault Modus

Renault R25

Renault Safrane

Renault Scenic 24c16+ABS

Renault Traffic Programming Via Micro

Renault Twingo Programming Via Micro

Renault Vel Satis

Renault Wind 93C76

Rolls Royce All Models Only in our Office

Rover 25/45

Rover 75

Rover 75 LCM

Rover 75 LCM Diagnostic

Rover 75 Light Module

Rover 75 Light Module Diagnostic

Rover Defender

Rover Discovery TD5 Programming Via BCU

Rover Freelander to 05/01

Rover Freelander to 06/02 Only in our Office / In progress

Rover Landrover

Rover MGF

Rover MGTF 2003/2004 Programming Via Micro

Rover Mini Cooper

Rover Mini Cooper 2 Models up to Sept 2003 Programming Via Cluster & Box

Rover Range Rover

Rover Range Rover 2001/2002

SKODA YETI

Saab 9-3

Saab 9-5

Saab 900 Not Implemented

Saab 93 24C02

Saab 93 9S12 Programming Via BDM

Saab 93 Model 2003 All models

Sang Yong Rexton

Scaglietti

Seat All

Seat All Diagnosis

Seat Altea

Seat Altea Diagnostic

Seat Arosa

Seat Cordoba

Seat Exeo

Seat Ibiza

Seat Inka

Seat Leon

Seat Leon 2005 - PRESENT YEAR

Seat Leon Diagnostic

Seat Mii Diag

Seat Roomster

Seat Toledo

Seat Toledo 2005 - PRESENT YEAR

Seat Toledo Diagnostic

Skoda Citigo Diag

Skoda Fabia

Skoda Fabia 2002 Diagnostic

Skoda Octavia

Skoda Octavia 2008 - PRESENT YEAR

Skoda Octavia Service inspection & Klms Diagnostic

Skoda Roomstar

Skoda Roomster

Skoda Superb

Skoda Yeti

Smart Four four Cluster & BSI & Micro

Smart FourFour

Smart Smart All models Tacho & BSI Programming Via Box & Cluster

Ssangyong Rodius c46

Ssngyong Kyron

Subaru Forester

Subaru Impreza

Subaru Imreza 93C76

Subaru Legacy

Subaru Outback

Subaru Tribeca

Susuki Liana

Suzuki Alto

Suzuki Alto 2009

Suzuki Cycle Intruder

Suzuki GSR 750

Suzuki Gran Vitara

Suzuki Ignis

Suzuki Intruder

Suzuki Jimny

Suzuki King Quad 93C56

Suzuki Liana 2005

Suzuki Liana 2005 Program via chip

Suzuki SX4

Suzuki Splash C46

Suzuki Swift 2005

Suzuki Swift 24C16

Suzuki TL 1000S

Suzuki Vitara

Tiguan 2009

Toyota Avensis

Toyota Avensis 2004

Toyota Avensis Diagnosis

Toyota Camry

Toyota Cellica

Toyota Corolla

Toyota Corrolla VDO

Toyota HJ 100

Toyota Hi Ace

Toyota Hilux

Toyota IGNIS

Toyota K95

Toyota Kijang

Toyota Land Cruiser 2003 C66

Toyota Landcruiser

Toyota Landcruiser 2003 Ch66

Toyota Lexus 250

Toyota MR 2

Toyota Picnic

Toyota Prado

Toyota Previa

Toyota Prious

Toyota Prius

Toyota RAV4

Toyota Raum

Toyota Rav4 2005

Toyota Starlet

Toyota Yaris

Toyota Yaris Tsport

Triumph Street Triple

VAG EDC16

VAG EDC16 (VW T5)

VAG EDC16 95320

VAG GOLF6,PASSAT, PASSATCC,SEAT IBIZA,SKODA SUPERB

VAG Johnson Controls Diag

VAG MCU EDC16 CAN

VAG Marelli

VW

VW / Skoda Golf 5, Caddy, Octavia SW 09

VW Amarok Tacho/CLR error/Service

VW Beetle

VW Beetle -2011

VW Beetle 2011-

VW Bora

VW Bora Diagnosis

VW Caddy

VW Caddy 2003-2010 Tacho/CLR error/service

VW Caddy 2005 Diagnostic

VW Caddy Cluster-Diagnosis

VW Corrado Cluster-Diagnosis

VW Crafter

VW Crafter

VW Crafter EZS HCS12X (V3)

VW Crafter Sharan

VW DSG

VW EOS

VW EOS -2009

VW EOS 2009-

VW Golf

VW Golf 3 Cluster-Diagnosis

VW Golf 3 MM/VDO

VW Golf 4

VW Golf 4 24C08

VW Golf 4 All models Diagnostic

VW Golf 4 BOSH

VW Golf 4 Bosch

VW Golf 4 Diagnosis

VW Golf 4 ID 'BNO'

VW Golf 5 Visteon

VW Golf 6

VW Golf Mk 5 up to 2008

VW Golf Mk 5 up to August 2006 Diagnostic

VW Golf Visteon

VW Golf Visteon Diagnostic

VW Golf5

VW Golf5 Tacho/ECU/CLR error/Service

VW Golf5 Up to August 2006 Diagnostic

VW Golf6 95320

VW Golf6 MM5/MM7

VW Golf6 Tacho/Color/CLR error/Service

VW LT Cluster-Diagnosis

VW Lupo

VW Lupo Diagnosis

VW Lupo/Polo

VW New Beetle Diagnosis

VW New Sharan

VW New Sharan Diagnosis

VW POLO

VW Passat B3 Cluster-Diagnosis

VW Passat B5

VW Passat B5 Diagnosis

VW Passat B6 -2008 Tacho/ECU/CLR error/Service

VW Passat B6 2008- Tacho/ECU/CLR error/Service

VW Passat B6 up 12/00 Diagnosis

VW Passat CC Tacho/Color/CLR error/Service

VW Phaeton

VW Pheaton -2007

VW Pheaton 2007-

VW Pheaton Bosch Diagnostc

VW Polo 1994-2001

VW Polo 2001-2008

VW Polo 2003 Diagnostic

VW Polo 2009-

VW Polo Diagnosis

VW Scirocco

VW Scirocco -12/2009

VW Scirocco 12/2009-

VW Sharan

VW Sharan 2006 model Diagnostic

VW Sharan Diagnosis

VW T4

VW T4 1998-

VW T4 Bus Cluster-Diagnosis

VW T5

VW T5 2003-1010

VW T5 2010- Tacho/CLR error/Service

VW Taro

VW Taro Cluster-Diagnosis

VW Tiguan -2009 Tacho/ ecu/CLR error/Service

VW Tiguan 2009- Tacho/CLR error/Service

VW Touareg

VW Touareg 2002-2010

VW Touareg 2007 - PRESENT YEAR

VW Touareg 2010-

VW Touareg CAN

VW Touareg Diagnostic

VW Touran -2010 Tacho/ ecu/CLR error/Service

VW Touran 2010- Tacho/CLR error/Service

VW Touran Service Inspection Diagnostic

VW Vento Cluster-Diagnosis

VW Visteon

VW/SEAT/SKODA

Vauxhall Astra 2004

Vauxhall Meriva Diagnostic

Vauxhall Movano

Vauxhall Speedster

Vauxhall Vectra 2004

Volvo S40 / V40

Volvo S60 / V60

Volvo S80 2008-

Volvo S80 up 02/99 Cluster-Diagnosis

Volvo V40 Model 2003 on

Volvo V50 Programming Via Micro

Volvo V60/V70/V80. Model 2002 Programming Via Micro

Volvo V70

Volvo V70 2002 HC12 Cluster-Diagnosis

Volvo V70 2008 - PRESENT YEAR

Volvo V70 V2 HC12 Cluster-Diagnosis

Volvo V70 to 01/99

Volvo V70 up 02/00 Cluster-Diagnosis

Volvo V70 up 02/99 to 01/00 Cluster-Diagnosis

Volvo XC 70 2003/2004 Programming Via Micro

Volvo XC 90 2003/2004 Programming Via Micro

Volvo XC60 2008-

Volvo XC60, S80, V70 2008 - PRESENT YEAR

Volvo v50 hcs12 new layout

Wiesmann Roadster

Yamaha Cycle YZFR1 2005 L56R

Yamaha Fazer 600

Yamaha Fazer FZ6 S2 C56

Yamaha R6

Yamaha VTR 1000 93C46

Yamaha Wild Star 93C46

Yamaha Wildstar/R6/R1(C56) changes

Yamaha XV1900

Yamaha YZF-R1 93C46

Yamaha YZFR1 MY02



www.mbstartool.com

Posted by: OBDexpress.co.uk at 01:46 AM | No Comments | Add Comment
Post contains 6854 words, total size 93 kb.

December 16, 2017

Cheapest Kess V2 5.017: €105

Kess V2 firmware 5.017drops price on Christmas Sales:105 euro. (the original price: 149 euro)

Better price but same HQ quality

.

PCB is improved a lot:

1.the left upper corner and the lower right corner notch size is not the same

2.More than buzzer

3.WFs = Infineon, BCR112 NPN Digital Transistor

4.27E = ON Semiconductor NUP2105LT1G

5.6DW = NXP BC817,215 NPN Bipolar Transistor

6.A6c =MMUN2113LT1G / MMUN2113LT3G

7.K5B = BC807-25-7-F PNP Bipolar Transistor

8.Using imported Japanese Murata filter NFE61PT472C1H9L

Look here:



se137-c1-kess-v2-5.017-NEW-pcb-(1)se137-c1-kess-v2-5.017-NEW-pcb-(2)se137-c1-kess-v2-5.017-NEW-pcb-(3)se137-c1-kess-v2-5.017-NEW-pcb-(4)se137-c1-kess-v2-5.017-NEW-pcb-(5)se137-c1-kess-v2-5.017-NEW-pcb-(6)

Why should you have a new Kess 5.017 master?


Compared to KESS V4.036, the KESS 5.017 has been improved a lot:

  1. 100% working
    2.No tokens limited
  2. No network connection limitation
  3. with original database
    5.supportsWindows 7 & Windows 8, not only Windows XP
    6. supports more cars & bikes & trucks fully activated


Kess v2 master or slave? original or clone?


It all depends. Kess v2 good clone used be ok for older ecus only, but now also work great with newer ones. and with a slave you will have to rely on the master for your maps whaere as if you have a master you can write your own or choose where you get them from.


KESS V2is aECU programming toolthat is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application ( tricore and ST10).


With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag you need to take apart the ECU and open it , after you can make the read/write operation.


Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed.



Posted by: OBDexpress.co.uk at 03:05 AM | No Comments | Add Comment
Post contains 324 words, total size 28 kb.

December 14, 2017

VAUX-COM 2016 download free for Opcom fw 1.45

Free download VAUX-COM 2016 Op com software:

Password: CarTechnoloGY


Extract the files in C: and make a shortcut ofVAUXCOM: exefor desktop

Inside. There is a folder with all FIRMWARE. and with OCFLASH

I’ve tried it with my OP-COM clone and it works … I have not done it in any car, but I believe it works

VAUX-COM 2016 interface

vaux-com-2016-opcom-clone

Astra K is the only one in 2016 in this version

But aspreviosversionvauxcom120309a+131223dthe only things thatisworking is the one that vauxcom120309a cover

Example:

In 2015 version itwas fixa bug in Astra H A17DTR and A17DTJ ( check logs file from op-com.hu )

In thisversionall themesuringblocks / live data are showed correct

Invauxcom120309 all the live data/ parametresare showed "—”

In realvauxcom131223dthe live data parameters are partial fixed. Thismeanthat theDPFparameters are still "—”

In theopcom150406 andvauxcom160115aallthisparameters arecorect

Check and see.

And this versionitsworking with any firmware version starting withopcomfw1.45. No need newer one becauseitsnotusefullat all

The vaucom.exe file don’t know and don’t need newer version of firmwarethenopcomfw1.45

But aspreviosone this mix can be used too if you like just to see newer carinthe list

Good luck!


Source:

 

Posted by: OBDexpress.co.uk at 06:44 AM | No Comments | Add Comment
Post contains 195 words, total size 11 kb.

VAUX-COM 2016 download free for Opcom fw 1.45

Free download VAUX-COM 2016 Op com software:

Password: CarTechnoloGY


Extract the files in C: and make a shortcut ofVAUXCOM: exefor desktop

Inside. There is a folder with all FIRMWARE. and with OCFLASH

I’ve tried it with my OP-COM clone and it works … I have not done it in any car, but I believe it works

VAUX-COM 2016 interface

vaux-com-2016-opcom-clone

Astra K is the only one in 2016 in this version

But aspreviosversionvauxcom120309a+131223dthe only things thatisworking is the one that vauxcom120309a cover

Example:

In 2015 version itwas fixa bug in Astra H A17DTR and A17DTJ ( check logs file from op-com.hu )

In thisversionall themesuringblocks / live data are showed correct

Invauxcom120309 all the live data/ parametresare showed "—”

In realvauxcom131223dthe live data parameters are partial fixed. Thismeanthat theDPFparameters are still "—”

In theopcom150406 andvauxcom160115aallthisparameters arecorect

Check and see.

And this versionitsworking with any firmware version starting withopcomfw1.45. No need newer one becauseitsnotusefullat all

The vaucom.exe file don’t know and don’t need newer version of firmwarethenopcomfw1.45

But aspreviosone this mix can be used too if you like just to see newer carinthe list

Good luck!


Source:

 

Posted by: OBDexpress.co.uk at 06:44 AM | No Comments | Add Comment
Post contains 195 words, total size 11 kb.

VAUX-COM 2016 download free for Opcom fw 1.45

Free download VAUX-COM 2016 Op com software:

Password: CarTechnoloGY


Extract the files in C: and make a shortcut ofVAUXCOM: exefor desktop

Inside. There is a folder with all FIRMWARE. and with OCFLASH

I’ve tried it with my OP-COM clone and it works … I have not done it in any car, but I believe it works

VAUX-COM 2016 interface

vaux-com-2016-opcom-clone

Astra K is the only one in 2016 in this version

But aspreviosversionvauxcom120309a+131223dthe only things thatisworking is the one that vauxcom120309a cover

Example:

In 2015 version itwas fixa bug in Astra H A17DTR and A17DTJ ( check logs file from op-com.hu )

In thisversionall themesuringblocks / live data are showed correct

Invauxcom120309 all the live data/ parametresare showed "—”

In realvauxcom131223dthe live data parameters are partial fixed. Thismeanthat theDPFparameters are still "—”

In theopcom150406 andvauxcom160115aallthisparameters arecorect

Check and see.

And this versionitsworking with any firmware version starting withopcomfw1.45. No need newer one becauseitsnotusefullat all

The vaucom.exe file don’t know and don’t need newer version of firmwarethenopcomfw1.45

But aspreviosone this mix can be used too if you like just to see newer carinthe list

Good luck!


Source:

 

Posted by: OBDexpress.co.uk at 06:42 AM | No Comments | Add Comment
Post contains 195 words, total size 11 kb.

December 13, 2017

How to use Tech 2 to clear Theftlock on 2011 Chevrolet

Received my cloneTech2 scanner so was finally able to clear Theftlock on my replacement OEM Bose navigation head unit I swapped out when the screen failed on the one in my 2011 Grandsport.


The following are screen shots from theTech 2showing how to remove the Theftlock code and relearn the VIN on the replacement radio.


It’s Tech2 software version 33.004

Tech2-Clear-Theftlock-1

Select Diagnostic in Main Menu

Tech2-Clear-Theftlock-2

Select model

2011 Passenger Car Chevrolet

Tech2-Clear-Theftlock-3Tech2-Clear-Theftlock-4Tech2-Clear-Theftlock-5

Select a product line: Y

Tech2-Clear-Theftlock-6

Body

Tech2-Clear-Theftlock-7

Navigation radio

Tech2-Clear-Theftlock-8

Body control module

Tech2-Clear-Theftlock-9

Navigation radio

Tech2-Clear-Theftlock-10

Module setup

Tech2-Clear-Theftlock-11

VIN relearn

Tech2-Clear-Theftlock-12

Clear radio theft information


Tech2-Clear-Theftlock-13Tech2-Clear-Theftlock-14

Radio theft information is cleared

Tech2-Clear-Theftlock-15


Done!


Source:


Posted by: OBDexpress.co.uk at 02:24 AM | No Comments | Add Comment
Post contains 111 words, total size 28 kb.

December 12, 2017

OBDSTARH100 car key programmer

OBDSTARH100 car key programmer is OBDSTAR F100 Update version. Compare with OBDSTAR F100 Car List, OBDSTAR H100 Key Programmer add more newest car models such as 2016/2017 years, even to2018year. H100 Key Programmer can do F150/F250/F350 now. It’s the best Ford Key Programmer and Mazda Key Programmer now.


OBDSTARH100 Function

Pin code read

Key Programmer

Cluster Calibrate

Mileage Correction


Picture shows:

OBDSTAR H100


OBDSTAR H100


OBDSTAR H100


OBDSTAR H100


OBDSTAR H100


OBDSTAR H100

Comparision betweenOBDSTAR F100and OBDSTAR H100:

1. H100 use new hardware chip, whichhavebetter performance than F100

2. H100 support car models till 2017/2018. Most important is H100 added follow car models:

FORD

Pincode Free Matching

for New Mondeo/Edge/Taurus/Mustang/F150 2015- Models

Edge 2016+

F150 2015

Galaxy 2015+

Mondeo 2015+

Mustang 2015+

Ranger 2016+


OBDSTARH100 car list at here :

http://www.obdexpress.co.uk/service/how-to-use-obdstar-h100-key-programmer-24643.html


OBDSTAR H100 Hardware Parameters:

Dimension: 156mm(L)*86mm(W)*28mm(H)

CPU: Cortex M3

Power Supply: DC12V

Operation Power: DC12V

Operation Temperature: -20-60℃

Display Screen: 320X240 TFT



Package includes:

1pc x OBDSTAR H100 main unit

1pc x OBD Main cable

1pc x User's Manual

1pc x TF Card Reader

obdstar h100 package

More info :

http://www.obdexpress.co.uk/wholesale/obdstar-h100-ford-mazda-car-key-programmer.html



Posted by: OBDexpress.co.uk at 09:45 AM | No Comments | Add Comment
Post contains 171 words, total size 11 kb.

Condor XC Mini support code d1767 for 2016 Kia Optima

Okguyslocksmith buddies haveCondor xc-minisupport code d1767 for 2016 Kia Optima. Tech is trying but only showsnonhisec option. I’m not there nor am fluent with Condor Mini machine

 

This is whatXhorse Condor minishows with code k1767

condor-mini-support-code-d1767

And this is Ninja shows this

Ninja-shows-this

Source:

http://blog.obdexpress.co.uk/2017/12/11/condor-xc-mini-support-code-d1767-for-2016-kia-optima/

Posted by: OBDexpress.co.uk at 02:33 AM | No Comments | Add Comment
Post contains 53 words, total size 1 kb.

Condor XC Mini support code d1767 for 2016 Kia Optima

Okguyslocksmith buddies haveCondor xc-minisupport code d1767 for 2016 Kia Optima. Tech is trying but only showsnonhisec option. I’m not there nor am fluent with Condor Mini machine

 

This is whatXhorse Condor minishows with code k1767

condor-mini-support-code-d1767

And this is Ninja shows this

Ninja-shows-this

Source:

http://blog.obdexpress.co.uk/2017/12/11/condor-xc-mini-support-code-d1767-for-2016-kia-optima/

Posted by: OBDexpress.co.uk at 02:33 AM | No Comments | Add Comment
Post contains 53 words, total size 1 kb.

December 08, 2017

Christmas Sale - Best Price on Obdexpress.co.uk

2017 XMAS SALE on Obdexpress.co.uk:

– Best price for hot products

– Free gifts:

Cost more than 199 euro – get OP-COM for free

Cost more than 399 euro – get VAG CAN PRO for free


Top 5 Hot Items on Obdexpress.co.uk

No. 1: BDM Probe Adapters Full Set (Denso, Marelli, Bosch, Siemens)

This BDM adapter full set can be used with K-TAG/KESS /KTM/Trasdatachip tuning tool

SO447-BDM-adapter-best-price

It is an electronic circuit intended for BDM operation on supported ECU. The adapter provides pogopin basedconnectors for interfacing the ECU BDM connector. Interfacing the supported tool is made by the use of intermediate circuit board (multiplexer) that connects to the adapter over the MUX connector and to the tool over the desired tool connector ( FGTECH, XPROG, BDM100, Dimsport, KTM100,Kess V2&KTAG, etc.)


No. 2:KESS V2 5017 ECU ProgrammerRed PCB!

SE135-B1-ktag-best-price

Compared to KESS V4.036, the KESS 5.017 has been improved a lot:

  1. 100% working
    2.No tokenslimited
  2. withoriginal database
  3. Network Connection– Confirmed no issues
    4.Windows 7 & Windows 8supporting, not only Windows XP
    5. supports more cars & bikes & trucks unlimited tokens, fully activated


Hint: Kess V2 firmware 5.017 of Maximum quality. Check it here



No.3V7.020 KTAG 7.020 (Red PCB) + Free ECM TITANIUM V1.61

SE137-C1-kess-v2-best-price

KTAG firmware 7.020worksbetter, faster and more stable than old versions:

  1. adds 100+ ECU types& supports new car models e.g.Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.
  2. more languages available English, Italian, Portuguese, French, Deutsch, Spanish)
  3. better wiring description (inwordsnot pictures).
  4. Network Connection– Confirmed no issues




KESS V2isaECUprogramming toolthat is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application ( tricoreand ST10).


With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag you need to take apart the ECU and openit,after you can make the read/write operation.


Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU thatneedto disassemble from the car and open and this is the case for all the ECU thatneedto be programmed with Jtag,BDMand Boot protocols, so KTAG is needed.


No. 4LonsdorK518ISE Key Programmer

SK213-Lonsdor-k518ise-best-price

1stkey programmer tool in the world is able to:

Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.

Toyota/Lexus: smart key all key lost – via OBD ( without dismantle)

BMW CAS3/CAS3+/CAS3++: direct OBD programming

BMW CAS4/CAS4+: dismantle & read data programming

2016 -New Maserati: smart key programming

2016 -New Ford: smart key programming

Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.

Renault ( Megane, Koleos, Scenic) without PIN code key programming

VAG group 4th & 5th immobilizer system

Ferrari (458, F12, F149): direct OBD programming

Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.


No.5AUTEL MaxiSys MS906BT Advanced OBD2 Diagnostic Tablet

SP262-B-Autel-Maxisys-MS906BT-best-price

MaxiSys MS906BT is the latest addition to the MaxiSys product line of advanced wireless diagnostic devices. The device is based on the Android operating system featured with the best possible coverage of OE-level diagnostics and ECU coding capability. Utilizing the powerful Exynos 5260 6-core processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15), an 8” capacitive HD touch screen, and long-distance wireless communication, the MaxiSys MS906BT efficiently provides comprehensive vehicle diagnostics and analysis.


Note: Autel vs Launch


  • The launch and theautelare pretty much the same as far as capabilities. I have the Matcomaxgo, which is a rebranded launch, and it is pretty darn impressive. It is much fasterthenmy snap on scanner and more closely mimics the factory scantoolfor each brand. My only complaint is that it doesn’t graph quite as well as the snap on. I haven’t used theautel908, but I’ve used the older 708. It had excellent capabilities, but again, didn’t care for the graphing. As far as customer service goes, I’ve had zero issues, so no need to make any phone calls.


  • Being a master Audi tech who has now moved toindependents, ipersonally prefer thelaunch. Why? Strictly due to the bidirectional abilities; which, inessenceis not a proper statement. I have used both.The Autel is fantastic foruser friendliness. it was designed to diagnose each and every manufacturetothe highest capabilities of, well, letsuse the term "generic” diagnostics.The Launch has the ability to program in the same concepts of the factory. As in, I am able to complete long coding of "most” modules in BMW and VAG meanwhile I am stuck with quick coding and bare minimal basic adaptations with Autel. Both are greattools,but are only as good as the user.




Posted by: OBDexpress.co.uk at 09:26 AM | No Comments | Add Comment
Post contains 812 words, total size 52 kb.

December 07, 2017

ICOM Next + BMW E series CIC = Not A Good Idea

It’s in the release notes forISTA-P 3.59.2thatICOM Nextand E series CIC is not a good idea. It does not saywhyunfortunately.

Here you go.


Release Notes ISTA/P P3.59.2

5.1.5. Programming the CICR head unit takes a long time

Faultdescription: Theprogramming of vehicles with CICR using ICOM Next takes a long time.

Model series affected:E60, E61, E63, E64, E70, E71, E72, E81, E82, E84, E87, E88, E89, E90, E91, E92,

E93

Measure / Workaround:Please use anICOM A1orICOM A2.

Fault correctedby: Faultelimination is expected with ICOM Next firmware 03-14-09.



How to update BMW E series CIC with ICOM A2:

Car: E87 2006

Tool: BMW ICOM A2

Program: WinKFP


Disclaimer: You are on your own risk.

PRE STEPS: In the E87 DATEN folder, make sure to swap out the file CI63F1 from the E87 Folder. Then Load assembly line data into WINKFP (at first WINKFP should besetupforSTD:OBDconnection so you can do this part without having to connect to the car or ICOM).

Following steps:

0 – Move Car Key to position 1

1 – ConnectICOM A2to any available MOST (fiber optic) Connector. Connect the USB cable between it and the ICOM module.

2 – Connect OBD connector to ICOM Module.

3 – Connect ICOM to Laptop via Ethernet cable.

4 –Start upItool Radar and Reserve the ICOM slot. (You’ll need to search for ITool Radar).

5 – I usually use the EasyConnect after ITOOL to select the MOST bus ASYNC setting and LOCK Icom.

6 –Start upWINKFP and select comfort mode

7 – Select Update ZUSB

8 – From the list, select CI62F1 first and click OK.

9 – Enter VIN

10 – ClickDONE.

11 – In Next window, Click PROG-ZUSB.

12 – Blue bar will start – This step will take about 35-40 minutes. CIC screen will turn black andcicfan will be blowing at full speed.

13 -Select Update ZUSB again

14 – From the list, select CI63F1 and click OK.

15- Enter VIN

16 – ClickDONE.

17 – In Next window, Click PROG-ZUSB.

18 – This step takes about 7-10 minutes.

19 – Lastly Select Update ZUSB again

20 – From the list, select CIA0F1 and click OK.

21 – Enter VIN

22 – ClickDONE.

23 – In Next window, Click PROG-ZUSB.

24 – Screen might come up with BMW symbol and bootloader mode.

25 – This step takes about 45 minutes.

Once these steps are complete, CIC will boot up again and you’re done!

Source:

http://blog.obdexpress.co.uk/2017/12/07/icom-next-bmw-e-series-cic-not-a-good-idea/

Posted by: OBDexpress.co.uk at 08:35 AM | Comments (1) | Add Comment
Post contains 417 words, total size 22 kb.

<< Page 1 of 2 >>
434kb generated in CPU 0.0548, elapsed 0.1126 seconds.
34 queries taking 0.0704 seconds, 151 records returned.
Powered by Minx 1.1.6c-pink.