June 11, 2021
Skoda Octavia 2013 all key lost done via Aute IM508 + XP400 PRO
Step 1 Read IMMO data
Establishing vehicle commuication to read IMMO data only takes a few seconds
Vehicle anti-theft infomation
Step 2.make dealer key
Connection programmer...
NOTE:please put a blank key in theXP400 PROprogrammer keyhole and then press"OK"
Connection programmer...
Establishing communication with the key ...
Make dealer key success!
Step 3 .Key learing
Check: Does the vehicle have keys?
Number of keys that need to be learned （1-8）
Turn ignition off and wait for 5s, then turn ignition switch to ON.
Key learning completed.
Used Autel MaxiIM IM508 and XP400 Pro to program key for Skoda Octavia 2013 with All Keys Lost. No dashboard out, no vag helper, no service mode, no precoded key, only obd.
Autel MaxiIM IM508with XP400 Pro is able to program key for Skoda Octavia 2013 24C32 all key lost via OBD.Easy to use, Here we are
Look at the new blank key (after inserting it into the ignition and turning it on, you can see "NO Key†on the dashboard).
Operation starts:
Connect Autel IM508 and Skoda Octavia 2013 via OBD2 port
IMMO>>SKODA>>Expert selection>>IMMO IV Instrument CAN>>Auto detect
Diagnostic program loading...
System data initiazing...please wait
Establishing vehicle commuication...
Current instrument type isVDO NEC+ 24C32,press OK
To program all key lost there 3 steps below:
Look at the new blank key (after inserting it into the ignition and turning it on, you can see "NO Key†on the dashboard).
Operation starts:
Connect Autel IM508 and Skoda Octavia 2013 via OBD2 port
IMMO>>SKODA>>Expert selection>>IMMO IV Instrument CAN>>Auto detect
Diagnostic program loading...
System data initiazing...please wait
Establishing vehicle commuication...
Current instrument type isVDO NEC+ 24C32,press OK
To program all key lost there 3 steps below:
- Read IMMO data
- Make dealer key
- Key learing
Step 1 Read IMMO data
Establishing vehicle commuication to read IMMO data only takes a few seconds
Vehicle anti-theft infomation
Step 2.make dealer key
Connection programmer...
NOTE:please put a blank key in theXP400 PROprogrammer keyhole and then press"OK"
Connection programmer...
Establishing communication with the key ...
Make dealer key success!
Step 3 .Key learing
Check: Does the vehicle have keys?
Number of keys that need to be learned （1-8）
The next steps are to follow the Autel MaxiIM IM508 on-screen instruction to do until the car can start the car.
Establishing vehicle communication...
Please
insert in sequence the keys that need to be learned into the ignition,
switch within the 30s, and turn to ON, The keys should be changed at an
interval of less than 5s, Number of keys learned/Number of keys that
need to be learned: 0/1
Turn ignition off and wait for 5s, then turn ignition switch to ON.
Key learning completed.
Used Autel MaxiIM IM508 and XP400 Pro to program key for Skoda Octavia 2013 with All Keys Lost. No dashboard out, no vag helper, no service mode, no precoded key, only obd.
Source:https://www.autelim608.co.uk/service/skoda-octavia-all-key-lost-via-autel-im508.html
Posted by: OBDexpress.co.uk at
07:20 AM
| Comments (7)
| Add Comment
Post contains 302 words, total size 5 kb.
<< Page 1 of 1 >>
21kb generated in CPU 0.0142, elapsed 0.0822 seconds.
34 queries taking 0.0713 seconds, 119 records returned.
Powered by Minx 1.1.6c-pink.
34 queries taking 0.0713 seconds, 119 records returned.
Powered by Minx 1.1.6c-pink.
