Need to do EGR off of Zafira 2.2 dti, I read it with MPPS v18, but I can't write any file I have changed. Mpps can't do it and winols doesn't recognize a ECU.

https://mega.nz/#!1UoRTQAL!nbgp2BJ8zWOxSys3jDCZz-44jpbXVJL90zA5ciULfck

Answer:

I am reading it directly, mymppsworks without any problem, I can read and write files to psg16 without any problem but only original ones without modifications. I need good file with correctchecksum.

Finally, I have done it already with my file, and everything is ok.

For all with problems like mine:

The problem was in the security access, the first try is unsuccessful and you must not power off the ecu, a second try is with success. That was my fault, every time I was resetting a pump.

http://blog.obdexpress.co.uk/2019/07/31/egr-off-of-zafira-2-2-dti-with-mpps-v18/

Posted by: OBDexpress.co.uk at 01:47 AM | No Comments | Add Comment
Post contains 134 words, total size 2 kb.

Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, needKtag,FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.

1. Read Kia kefico m7.9.8 with FGTech, here is a tutorial

http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v54-100-readwrite-bosch-mg-7-9-8/

2. Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.

BOSCH_M798_KIA

The LAY by pins are located on the lower part of the ECU

PLUGIN 167

Connect the power (+12v) only for DIRECT CONNECTION,

do not connect power (+12V) with DIMA CONNECTION

DIRECT CONNECTION

Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.

DIMA CONNECTION

Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.

I would advise using pencil, it is always faster, comfortable and clean to work.

Fromhttp://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html

http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-kefico-m7-9-8/

Posted by: OBDexpress.co.uk at 06:53 AM | No Comments | Add Comment
Post contains 151 words, total size 6 kb.

Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, needKtag,FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.

1. Read Kia kefico m7.9.8 with FGTech, here is a tutorial

http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v54-100-readwrite-bosch-mg-7-9-8/

2. Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.

BOSCH_M798_KIA

The LAY by pins are located on the lower part of the ECU

PLUGIN 167

Connect the power (+12v) only for DIRECT CONNECTION,

do not connect power (+12V) with DIMA CONNECTION

DIRECT CONNECTION

Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.

DIMA CONNECTION

Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.

I would advise using pencil, it is always faster, comfortable and clean to work.

Fromhttp://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html

http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-kefico-m7-9-8/

Posted by: OBDexpress.co.uk at 06:53 AM | No Comments | Add Comment
Post contains 151 words, total size 6 kb.

Look here:Buick Excelle 2013 odometer correction with JMD OBD

Prepare:

Use a phone to download JMD APP on the official site

http://www.handy-baby.net/download.html

Have one JMD OBD

From http://www.obdexpress.co.uk/wholesale/jmd-obd-adapter-for-handy-baby2.html

Youtube video demo:

Firstly, start up the dashboard.

The old mileage is 81385 kilometer.

Insert the JMD OBD into the OBD2 port of the car.

Open the JMD APP.

Find out "OBD".

Tap "Band".

Add bind

Menu updates, download from internet.

Loading IMMO data, please wait.

Loading Match data, please wait.

Loading ODO data, please wait.

Tap ODO -> America -> Buick -> Excelle GT/XT -> IC -> Odometer Calibration.

Input a new mileage like 81384.

Writing the new mileage

Mileage calibration success.

Have new mileage 81384 on the dashboard.

Source:http://www.mileageprogrammer.com/jmd-obd-calibrates-odometer-on-buick/

Posted by: OBDexpress.co.uk at 01:11 AM | No Comments | Add Comment
Post contains 140 words, total size 7 kb.

Before usingMercedes MB SD CONNECT C4do access to DOIP ECU, it is required to set a new IP address : 169.254.0.** (** means, it can be any number between 0-255), otherwise SD C4 PLUS won't communicate with the DOIP. This article is available with SD C4 PLUS configuration procedure.

Youtube video demo:

1. Open the local network connection.

2. Click on "Properties".

3. Click on "Internet Protocol Version 4 (TCP/IPv4).

4. Set the IP address.

The current IP address is:172.29.127.24 and Subnet mask is 255.255.0.0.

5. Click on "Advanced".

6.Click on "Add" to set the IP address for DOIP.

7. Set the new IP address: 169.254.0.** (any number between 0-255 is okay)

8. Click on "Add", then "OK" to finish setting the IP address for DOIP.

Done.

sdconnect c4 star diagnostic toolis ready to communicate with Benz DOIP to diagnose and program.

http://blog.obdexpress.co.uk/2019/07/25/set-new-ip-for-sd-c4-plus-accessible-to-benz-doip/

Posted by: OBDexpress.co.uk at 01:12 AM | No Comments | Add Comment
Post contains 149 words, total size 6 kb.

Before usingMercedes MB SD CONNECT C4do access to DOIP ECU, it is required to set a new IP address : 169.254.0.** (** means, it can be any number between 0-255), otherwise SD C4 PLUS won't communicate with the DOIP. This article is available with SD C4 PLUS configuration procedure.

Youtube video demo:

1. Open the local network connection.

2. Click on "Properties".

3. Click on "Internet Protocol Version 4 (TCP/IPv4).

4. Set the IP address.

The current IP address is:172.29.127.24 and Subnet mask is 255.255.0.0.

5. Click on "Advanced".

6.Click on "Add" to set the IP address for DOIP.

7. Set the new IP address: 169.254.0.** (any number between 0-255 is okay)

8. Click on "Add", then "OK" to finish setting the IP address for DOIP.

Done.

sdconnect c4 star diagnostic toolis ready to communicate with Benz DOIP to diagnose and program.

http://blog.obdexpress.co.uk/2019/07/25/set-new-ip-for-sd-c4-plus-accessible-to-benz-doip/

Posted by: OBDexpress.co.uk at 01:12 AM | No Comments | Add Comment
Post contains 149 words, total size 6 kb.

Posted by: OBDexpress.co.uk at 02:50 AM | No Comments | Add Comment
Post contains 345 words, total size 18 kb.

Where to haveAutel MaxiCOM MK908P, Amazon, Ebay or one B2C website like obdexpress.co.uk. I would like to give my objective advice based on my web search and personal experience.

1. Who is cheapest?

1). Autel MaxiCOM MK908P price on amazon:

2.351,99€ , 2.369,99€ , 2.399,99€

2). Autel MaxiCOM MK908P price on Ebay

EUR 2.599, EUR 2.399, EUR 2.199,99 etc.

3) Autel MaxiCOM MK908P price onobdexpress.co.uk

€2,090.00

Source:http://www.obdexpress.co.uk/wholesale/autel-maxicom-mk908p.html

2. If I bought fromobdexpress, can I have language reset?

The answer is yes, after receive MaxiCOM MK908P, only supply with the serial number, you will haveone-time language reset service for free.

MaxiCOM MK908P languageavailable:

English, Spanish, French, German, Polish, Italian, Japanese, Korean, Dutch, Portuguese, Turkish, Swedish, Thai, Arabic, Russian

3.Does it have any limitation to use MaxiCOM MK908P?

The answer is NO. No matter who you are and where are you from, you can use MaxiCOM MK908P freely.

4. How long doesMaxiCOM MK908P offer free update online?

It isone-year free update online.

After one year, the update cost is 1135EURO/1000GBP.

5. Autel MaxiCOM MK908P Warranty

one year's guarantee

6. Autel MaxiCOM MK908P after-sales service

Don't need to worry about the Autel After-sales service.

http://www.obdexpress.co.ukis always here for service.

Autel MaxiCOM MK908P feedbacks will be more helpful.:

http://blog.obdexpress.co.uk/2019/07/09/autel-maxicom-mk908p-program-ecu-key-works/

Posted by: OBDexpress.co.uk at 06:04 AM | No Comments | Add Comment
Post contains 208 words, total size 6 kb.

Ford IDS 113.01is native installation now instead of virtual machine installation (to solve 3-day license problem), tested it on WIN10 and no problem. IDS 113.01 running withVXDIAG VCX NANOcan work with the Ford cars up to 2018 year, can perform lots functions i.e diagnosis, programming, coding and programming key etc.

Ford IDS 113.01 Win10 installation in 6 steps:

FYI, IDS 112.01 native installation procedure is as the same as IDS 113.01.

In the following parts, you will read IDS 112.01 win10 installation.

1. Setup" IDS-113.01_Full".

Please reboot the computer (required).

2. Click on "VX Manager" to complete setup.

3. PlugVXDIAG VCX NANO FORD cable to the computer.

Click on "Ford IDS".

Download.

Setup VCMII Plus Complete.

4. Click on "IDS".

5. Select dealer type, enter the dealer code, select country.

Enter IDS 113.01 to diagnose, program, code or program key etc.

Job is done.

Now, IDS Software has updated to V114,for sale here:

https://www.obdexpress.co.uk/wholesale/ford-vcm-ids-v108.01-software.html

No need shipping, after you pay, contact us for remote help to install and activate it.

Source:http://blog.obdexpress.co.uk/2019/07/22/ford-ids-113-01-native-setup-on-win10/

Posted by: OBDexpress.co.uk at 08:34 AM | No Comments | Add Comment
Post contains 177 words, total size 14 kb.

Ford IDS 114.03is newly released with new more fix:

1). online programming...Confirmed

2). included calibration file...confirmed.

3). included incode calculator forold model key programmingor module installation new series need a dealer account.

Ford IDS 114.03 is tested ok with VCM, VCM2 (original or clone) etc.

VCM 2 SP177-C:

http://www.obdexpress.co.uk/wholesale/ford-vcm-ii-diagnostic-tool-wifi-card.html

VCM 2 SP177-C1:

http://www.obdexpress.co.uk/wholesale/best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version.html

VCM 2 SP177:

http://www.obdexpress.co.uk/wholesale/best-quality-ford-vcm-ii-oem-diagnostic-tool-ids-wireless.html

VXDIAG NANO Ford: is testing

IDS 114.03 installation and activation via teamviewer only (Offline).

Ford IDS 114.03 features inNative remote installation, that means you can use it unlimited time, instead of installing on vmware or other virtual software.

Service for IDS 114.03 remote native installation

http://www.obdexpress.co.uk/wholesale/ford-vcm-ids-v108.01-software.html

Remember install teamviewer in advance before contacting.

Ford IDS 114.03 capabilities:

* Automatic vehicle recognition

* Read & Clear Diagnostic Trouble Codes (DTCs)

* Live Data-stream with Recording & Playback Functions for Main ECUs

* Guided Fault Finding

* New Software Re-flash for Existing ECUs

* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)

* Program New Keys (for additional fee)

* Injector Coding

* Set, Adjust or Remove Speed Governors

* DPF Regeneration

* Brake Bleeding

* Steering Angle Resets

* All Other Offline and online Dealer Functions

Thanks.

Source:

http://blog.obdexpress.co.uk/2019/07/22/ford-ids-v114-03-download/

Posted by: OBDexpress.co.uk at 06:27 AM | No Comments | Add Comment
Post contains 211 words, total size 5 kb.

Volvo Prosis Offline 2019-1-15Newest Release:

Prosis NT Offline

Data in this release is extracted 2019-01-12

Added model / component variants in this release:

EC15E

EC18E

EC20E

ECR18E

EC750E HR

EC200E

EC200E L

EC200E NL

Volvo Prosis Offline 2019 setup video

volvo prosis offline version download:

1. Free mega link

https://mega.nz/#!7B9jiIwC!PnsOXYedWdBaheR6TugKm7M-FWHgUamHJwEv_TPF65E

https://mega.nz/#!rNtxAAiK!6fF8rN_w4Wf50Jav0Ip3nfNnv91D_-1R_yzz8Um76hQ

https://mega.nz/#!aBshFCAR!lieVuJveET8SuvM9TayctsgHpFy3k8giakurKsaDi_o

https://mega.nz/#!WAkVgYyC!Qv9ek3eyBbkOPsY2-7KppxLsOUJwNXDy1yDfBhhGOCA

https://mega.nz/#!zZ9FjKDB!mToivnRUWpkOCmKnxTdtY6mb3BXJESVOPzCywlW1RhQ

https://mega.nz/#!qE1FBa5T!qAdPd6WTjjHtwAABnon-bV-H-iikOWkQQClKzF3THA0

https://mega.nz/#!GV8lBSYa!V6L2ZEu__ZWwh02BSETbLJfyGNFOCI_uDT0AIZkGyrM

Security: Unknown

2.Reliable and tested source

http://www.obdexpress.co.uk/wholesale/volvo-prosis-2013-parts-repair-20636.html

Security: 100% yes

The info of older versions

1. Prosis Offline 2017 Release:

Prosis NT Offline

Data in this release is extracted 2017-04-15

Added model / component variants in this release:

A60H

D2.6D

D3.8E

EC210D L

EC210D LR

EC60D

P4410B

P4820D

Volvo Prosis Offline 2013 release

Prosis Offline 2013 Release:

Prosis NT Offline

Data in this release is extracted 2013-01-05

Main changes in this release:

- Misc. updates.

Added model / component variants in this release:

-Pl4808D

-EC700C HR

-SD75

-D1.8A

- Dieselmax 444

Volvo Prosis Offline 2013 setup video

https://www.dailymotion.com/video/x249e00

Remember set the HD quality to 720, so that you can watch this video clearly.

Enjoy.

Posted by: OBDexpress.co.uk at 03:56 AM | No Comments | Add Comment
Post contains 177 words, total size 5 kb.

Posted by: OBDexpress.co.uk at 03:50 AM | No Comments | Add Comment
Post contains 458 words, total size 9 kb.

obdstar X300 DP plusis tested ok to do Renault Captur 2017- odometer correction. Here we go in step by step procedure.

It's true: Renault V30.81 Cluster calibration upgrade Captur (2017 - Block ABS/2017 -Unlock DASH/2013- Block ABS/2013- Unlock Dash)

Tap Cluster calibration - Renault - V30.81.

Tap "Captur".

Tap "2017 - ".

Captur 2017-

Block ABS

Unlock DASH

Mileage calibration option and Write FLASH option.

This function is available by connecting the server, please ensure the internet connection is normal.

Warning: The calibration process takes a long time, about 60 -90 minutes. To avoid too low power supply voltage, please connect the backup power supply!

Communicating...

Go on by following the on-screen instruction, until it complete.

I wanna say Renault Captur 2017- odometer correction usingobdstar X300 DP plusis really the best choice, the screen will have message directing you how to do next.

Source:http://www.mileageprogrammer.com/renault-captur-2017-odometer-correction-with-dp-plus/

Posted by: OBDexpress.co.uk at 07:23 AM | No Comments | Add Comment
Post contains 155 words, total size 7 kb.

In this article, NewestSDC4 Mercedes Benz Xentry diagnosis softwareis used to test Actuation of function "Ethernet communication (DOIP). It is better than old sdc4 without installing the battery when upgrading the firmware, it is better thanvxdiag C6because it can directly run the original software.

Mercedes Benz SD C4 with 1:1 copy program is supposed to be the best DOIP diagnostic tool, it features in:

1. When it upgrades the firmware, you don't need to install the batteries as the old SDC4, which is convenient and avoid the damage to the hardware.

2. The Wifi will be automatically connected after starting on SDC4 and it is very stable. You can use the WIFI to surf the net and diagnose Benz, so the testing job can be finished remotely.

3. New SDC4 is made of superb craftsmanship and good quality, waterproof, shockproof and tamper-proof.

4. Can directly run the original software.

How to's ofNewest SDC4test Doip?

VIDEO DEMO:

Enter VIN number.

Click on "Xentry Diagnosis".

Determination of vehicle data.

The diagnosis application is being started.

The boundary conditions are recorded.

The control units are being initialized.

Check of VIN.

The coding of the control unit is read.l

The emissions-relevant data are read out from the vehicle.

Click on "Initial Quick Test".

Click on "A26/17 -Audi 20 (Head unit).".

Click on "Continue".

Actuations -> Actuation of function "Ethernet communication (DOIP)"

Done.

The newest BENZ C4 DOIP Diagnostic tool For sale:

http://www.obdexpress.co.uk/wholesale/mb-sd-c4-doip-diagnostic-tool.html

Source:http://blog.obdexpress.co.uk/2019/07/16/xentry-ethernet-communication-doip/

Posted by: OBDexpress.co.uk at 07:29 AM | No Comments | Add Comment
Post contains 245 words, total size 18 kb.

ToKTM Bench ECU programmerusers:

Please remeber 3 Don'ts:

1. Don't enable the network connection, it works offline.
2. Don't updateKTM Bench by yourself
3. Don't run the unknown software from others or from pcmflash, only run our software, otherwise the KTM Bench will be damaged even though it works offline and you don't update.

No tokens limitation, can calculate Checksums.

In case the KTM Bench software lost, you can click the following links to download (uploaded byobdexperess.co.ukengineer)

Link 1:

https://share.weiyun.com/5Og6P4j

Pass: pzo9jz

Contains Car models and ECU model list

Link 2:https://mega.nz/#!B9oTQahI!HNlNhOuMYmYghLlLyCSECV6GyLbDJLg8wTZrv1J2m10

No password

Contains software and diagram

On windows x86.. Work 100%

If you are not at ease, contact email atSales@OBDexpress.co.uk

After that, you will be happy with KTM Bench.

1. Received one yesterday.

Working so far, haha.

Trying to find some egpt pinouts.

Tested volvo edc17cp22 and vag cp14 and working.

Some others dont seem to work.

looking for volvo med17 and siemens sid807 gpt.

Bdw. im running on win 7 32bit

Pcmflash bench mode reads flash and eeprom

tested volvo edc17cp22. Working well.

cp14 works good.

as i can see it reads all exept boot area, for recovery purpouse.

tested also sid 807 evo in boot. works.

Cabel Vkey dont have 12v.

after splitt powercabel all works.

Connector db15 don't have 12v+ on outputKTM adepter. I reworked power adepter so i can use ktag db15 cabel.

To be continued...

Edited by Laurance July 12, 2019.

Source:

http://blog.obdexpress.co.uk/2019/07/15/dos-and-donts-of-ktm-bench-ecu-programmer/

Posted by: OBDexpress.co.uk at 03:49 AM | No Comments | Add Comment
Post contains 242 words, total size 3 kb.

Topic:orange 5wire harness for 624926000 autoliv.

This pinout orange (tested ok !!):

If you have no ideal which color is which pin on the programmer.

Simply download vvdiprog software.

https://mega.nz/#!WooU3SjR!BPoxGNT9OOPmGQrlTxHY5FXSlrRb0_9NfgRDTKUmN7Q

It runs without hardware.

This will help you to figure out the colors, and leads

FYI, orange 5 now is in stock here:

http://www.obdexpress.co.uk/wholesale/oem-orange5-programming-full-packet.html

Source:http://blog.obdexpress.co.uk/2019/07/11/orange-5-wire-harness-for-624926000-autoliv/

Posted by: OBDexpress.co.uk at 03:26 AM | No Comments | Add Comment
Post contains 65 words, total size 3 kb.

Topic:orange 5wire harness for 624926000 autoliv.

This pinout orange (tested ok !!):

If you have no ideal which color is which pin on the programmer.

Simply download vvdiprog software.

https://mega.nz/#!WooU3SjR!BPoxGNT9OOPmGQrlTxHY5FXSlrRb0_9NfgRDTKUmN7Q

It runs without hardware.

This will help you to figure out the colors, and leads

FYI, orange 5 now is in stock here:

http://www.obdexpress.co.uk/wholesale/oem-orange5-programming-full-packet.html

Source:http://blog.obdexpress.co.uk/2019/07/11/orange-5-wire-harness-for-624926000-autoliv/

Posted by: OBDexpress.co.uk at 03:26 AM | No Comments | Add Comment
Post contains 65 words, total size 3 kb.

Topic:orange 5wire harness for 624926000 autoliv.

This pinout orange (tested ok !!):

If you have no ideal which color is which pin on the programmer.

Simply download vvdiprog software.

https://mega.nz/#!WooU3SjR!BPoxGNT9OOPmGQrlTxHY5FXSlrRb0_9NfgRDTKUmN7Q

It runs without hardware.

This will help you to figure out the colors, and leads

FYI, orange 5 now is in stock here:

http://www.obdexpress.co.uk/wholesale/oem-orange5-programming-full-packet.html

Source:http://blog.obdexpress.co.uk/2019/07/11/orange-5-wire-harness-for-624926000-autoliv/

Posted by: OBDexpress.co.uk at 03:26 AM | No Comments | Add Comment
Post contains 65 words, total size 3 kb.

1. ISTA+ (AKA Rheingold or ISTA-D)

2. ISTA-P

Posted by: OBDexpress.co.uk at 03:34 AM | No Comments | Add Comment
Post contains 247 words, total size 20 kb.

I'm extremely impressed with thisAutel MaxiCom MK908pscan tool after a few weeks of use. The interface is intuitive and navigation is quite easy. Thetouchscreen isincredibly the largest I’ve ever purchasedand is very responsive. I can scroll without having to resort to pushing buttons. The layout of PIDs and graphing capabilities are amazing. The PID descriptions are actually understandable. I have not seen a slew of cryptic abbreviations for any of the PIDs.

I've been really happy with thebi-directional capabilities. I've used it mostly on Fords, however, I believe Autel MK908P hits the ball out of the park and it will have useful by-directional controls for all makes.

It’ssuper easy to update, more like using anAndroid tablet,one-click update via Wi-Fiis enough to get the latest version of diagnostic software with more vehicle coverage and bug fixes.

Came with a J2534 ECU programming device, very professional for BMW and Benz. Capable of replacing the existing software in the ECU, programming new ECUs and fixing the software-controlled drivability issues.An advanced ECU diagnostic tool.

And it allows you to do a whole lot more than scan the car and diagnose problems. For instance, youcan reprogram keys as long as you get the key code. It is also able to reset many systems, from check engine light to ABS. Should you want to reprogram certain ECU settings, you are able to do so; however, this feature is only available for certain models. Above all, I guess these are the reasons why it claims to be a perfect scan tool for auto shops and professional technicians.

Out of the Snapon , Mac, and Matco scan tools I have, this one is by far the most versatile and complete.

Autel MaxiCom MK908P is the best one after MaxiSYS Elite, MaxiSYS MS908P, MaxiSYS MS908,it has advanced configuration (hexa-core Processor, 64GB memory, 10.1M LCD etc) as well as full-system full-brand diagnosis, ECU programming /coding etc.

Autel car list, search the model you like to do:

https://pro.auteltech.com/measurecarApp-1-1.html?m=94&operatorType=1

Enjoy.

Source:

http://blog.obdexpress.co.uk/2019/07/09/autel-maxicom-mk908p-program-ecu-key-works/

Posted by: OBDexpress.co.uk at 08:57 AM | No Comments | Add Comment
Post contains 626 words, total size 13 kb.