1. Orange 5 cloneread and writeeproms95640 and 95P08C3 in circuitno problem with no errors, but I had to make sure that my connections to the chip via test clip were all good and then toolworklike charm.

2. I have itfor a long time and for now everything is working properly.
   One of the few clones thatworkswell and works as an original.
   Some adapters are not supplied and must be purchased separately.

3. Adapters shouldbe resolderfor sure butit isn’t sobad,atall
   The main pointorange5cloneisn’t so bad as clones can be.
   Good investment forsure.

4. So faritsreading and writing (with verify) alleepromsitry.Goodtool so far.

5. I likePIN checking function(test insertions) verymuch.Itsaved my job a lot of time.
   In combination with myUPA -S,carprog,andTL866 a lot ofjobcan be donesuccessfully .

6. Great programmer.All that is stated works. If the speed of exchange is not important, you can do a lot.Many good calculators.

7. 93c66,46,56, 24c02,04
   S190, hc08(1j35d)ss read eeprom and flash
   Hc05x32 ss and read all went good.

8. I buy Orange5 china clone. Work great. NowI check in hc05b8, hc11e9, andeeproms. All read and write very fast.

9. This is my test report:

9. ThisOrange5isclonebutincludes IMMO HPX 9V0 Software License and adapter set, it worksgoodfor me with hundreds dollar compared with the original thousands dollar. I justread 1d69j adapter success.
10. First very easy to install, then I start tested it:all functions open 1-10 except car radio geterror, testedreading usual EPROMS all good, tested tms370 with adaptor board did not read so maybe bad adaptor board,tested IMMO login code fromdump, TMS VW works.
11. IMMO SW included and also activation for othersw.Only one minusis not haveupdates ,I have original also get this to play withit ,and can’t say bad forit ,till now first I read with original after that with the clone and no problem tillnow ,ofcourseI not test all but withsome NEC allok .
12. I have never had any problems with the clone; everything works as itshould,knock on wood. Not sureisthere any script butsoftwarefor IMMO, radioanddash coming together withclone.2j74y ok, 35080ok, TMS IMMO Opel ok, Hc05 IMMO old VW ok
13. Orange 5 OEM seems to be an EEPROM programmer. I oftenextract the dump of an EEPROM with a programmer and modify it with the softwarecame with the Orange 5.
14. Work great. Now Icheck in hc05b8, hc11e9 EEPROMs. All read and write very fast.
15. I haveOrange5 programmer OEM cloneand everything worksperfectfor now. Ihave 4 secured MCU, and they work ok. On Hc908az60 secured itwork’sgood. I have tried 68hc11 and it work’s just perfect.
    I have tested with 1j35d, 4j74y, 1d69j, 0d69j, 0f82b, 3k91d, TMS 370c702 OK!
16. I bought a clone orange 5 because original took a shit. Weneedput remote data up for all Chrysler keys and anything that uses 7941 to make orangeimmoreset moreusefull. Have been loggingout putof orange and mk3. Thought about making a device but by timedonemk3 clones will be out.tntenforcer opens up tm100 soft that needspaidfor andalotof mk3’s software options.Heywhy unpackexego through all the hassle, just runxpandtntenforcer.
17. Iread HC05x32 with O5 clonesuccess,when you want to be 100% sure, better to resolder all point on them.
    Or maybe the problem is in the voltage, that sometimes it loses, first to make BOOT, and when of OK then to read, if you change manual of a value smaller to 5v to read to 5v down to the right, this error tries, also When you do a bad reading the info of the MCU modifies it to you, be careful to read an original MCU or it will be damaged.
18. Ireadnecwithorangeclone .no problem.
19. Mine iscloneandworkvery well,EZS HC05 onadapter, Nats BDM, 307, 206 BSI BDM……
    But before using, need rework on all solder joint and cleaning all adapter…..
20. It made this adapter toworkingwithNissan NATS, tested NATS 4 easy work, not have NATS 5 fortestyet.
    If you want to make this adaptor and you need the pinout like inpicture.
    Here it is. All in one page for easiest working onbench.

9. Orange 5 clone need reverse TX and RX.

22. Orange5 is a learning tool at the moment I’m reverse engineering it.

Posted by: OBDexpress.co.uk at 02:40 AM | No Comments | Add Comment
Post contains 852 words, total size 92 kb.