In this article, NewestSDC4 Mercedes Benz Xentry diagnosis softwareis used to test Actuation of function "Ethernet communication (DOIP). It is better than old sdc4 without installing the battery when upgrading the firmware, it is better thanvxdiag C6because it can directly run the original software.

Mercedes Benz SD C4 with 1:1 copy program is supposed to be the best DOIP diagnostic tool, it features in:

1. When it upgrades the firmware, you don't need to install the batteries as the old SDC4, which is convenient and avoid the damage to the hardware.

2. The Wifi will be automatically connected after starting on SDC4 and it is very stable. You can use the WIFI to surf the net and diagnose Benz, so the testing job can be finished remotely.

3. New SDC4 is made of superb craftsmanship and good quality, waterproof, shockproof and tamper-proof.

4. Can directly run the original software.

How to's ofNewest SDC4test Doip?

VIDEO DEMO:

Enter VIN number.

Click on "Xentry Diagnosis".

Determination of vehicle data.

The diagnosis application is being started.

The boundary conditions are recorded.

The control units are being initialized.

Check of VIN.

The coding of the control unit is read.l

The emissions-relevant data are read out from the vehicle.

Click on "Initial Quick Test".

Click on "A26/17 -Audi 20 (Head unit).".

Click on "Continue".

Actuations -> Actuation of function "Ethernet communication (DOIP)"

Done.

The newest BENZ C4 DOIP Diagnostic tool For sale:

http://www.obdexpress.co.uk/wholesale/mb-sd-c4-doip-diagnostic-tool.html

Source:http://blog.obdexpress.co.uk/2019/07/16/xentry-ethernet-communication-doip/

Posted by: OBDexpress.co.uk at 07:29 AM | No Comments | Add Comment
Post contains 245 words, total size 18 kb.