OBDexpress.co.ukfriendly Reminder for those Requesting Software (ISTA+, ISTA/D and ISTA/P) – See Differences and Requirements.E-Series & R05x Mini:

Interface =K+DCAN Cable(OBDII to USB) orICOM

ECU Data Files = SP-Daten

NCS Expert = Coding Software

WinKFP = Programming (Flashing) Software

EDIABAS = Low Level ECU Communication Software used by NCS Expert & WinKFP

Fxx- / Ixx- / Gxx-Series, Mini (F05x/F06x), & Rolls-Royce:

Interface = ENET Cable (OBDII to RJ45 Ethernet) or ICOM

ECU Data Files = PSdZData

E-Sys = Coding Software

E-Sys = Programming (Flashing) Software

ICOM BMW:

ICOM A: main interface

ICOM B: adapter for programming multimedia in E series

ICOM C: adapter for old BMW with round 20 pin diagnostic plug

ICOM D: adapter for motorcycles

Additional Dealership Level Software

DIAGNOSTICS for All Vehicles

PROGRAMMING for F/I/G/RR & MINI, but requires an ICOM

All Requests, should be directedHere

Additional Details:Beginner’s Guide to BMW ISTA+

PROGRAMMING traditionally for all chassis, but F-/I-/G-series phased out with 3.63.5 release (March 201 .

ICOM Recommended. An ICOM emulator with K+DCAN or ENET can be used, but will NOT communicate over all protocols to program every ECU.

Replacement ECU’s must be NEW

MINIMUM REQUIREMENTS:

Windows 7-10 Computer

ISTA+: 22 GB Installation + > 2 GB free space to run (Diagnostics Only).

Additional 70 GB SDP & ICOM to program (Excludes E-series)

ISTA-P: 112 GB Installation

At least a processor with 2 cores and 2.2 GHz

At least 4 GB RAM

Source:http://blog.obdexpress.co.uk/2019/07/10/ista-ista-d-and-ista-p-differences-and-requirements/

Hide Comments | Add Comment