This is for your information: Looking forMPPS V21.

MPPS V21 clone in UK:

http://www.obdexpress.co.uk/wholesale/mpps-v18-main-tricore-multiboot-breakout-tricore-cable.html

MPPS V21 software, car list download, review:

http://blog.obdexpress.co.uk/2017/01/19/mpps-v21-obd-tricore-boot-download-car-list-review/

There are only 2 variants for the moment ORIGINAL and CLONE.

Clone you can buy for 100EU or less and ORI for 2500EU.

Thanks for comments:

Read written FLESH + MPC + EEPROMfiat marely 6f3, OK through OBD.

There are few tools that read-write EEPROM marely by OBD.

OBD-flash reading 3min 20 sec., 45 sec-writing.

MPC and EEPROM read OBD-20 seconds, 20 seconds writing ( multyboot OBD) .A very strong and stable tool.

its always a risk withedc17, this ecu opens easy , boot is safer , if you trust your tool you have to make a choice

testededc16u1 from T5 2007 1.9tdi AXB 77kw.

read write ok over obd on kline.

make sure you remove the fan plug from fan controller when writing on this cars. when flash is erased the fan will work on max speed .

Ems3132Bootmode. Read ok. Write not ok.

It erases the flash and cannot write.

Revived by k-tag.

MPPS V18 do not have capabilities to read and write PSG16 trough K-line.

If you want to flashPSG16 In Astra G, or Zafira Awith MPPS V18, you must connect to CAN lines directly.

Vectra C, Signum etc – through OBD port.

It is not so bad for a 50-60 euro tool !!!

Jetta 2,0 16v TSi 200cv – MED17.5.2 Tprot10

Read in Boot = OK

made OBD unlock and CKS by MPPS, write boot = OK

siemens ppd 03G 906 018 AQ

BRD: R4 2.0l PPD1.3 G 9973

read ..write obd ok..

it’s working.both can and kline. tested onbmw edc16c31,edc15v/,edc16u1

mpps in bootloader- obd can calculate c h ecksum
Marelli 6F3or others…

Audi a4 edc17cp14..read… write obd ok.

HW: 03L 906 022 B

R4 2,0L EDC H01 4375

NISSAN Q. EDC16CP33(4A44383842) R/W OBD = OK (CRC-OK).

Magneti Marelli 6f3, 6JF, 8F2, 8F3in obd and multiboot with micro and eeprom works very well!

Alfa Roméo Giulietta 2L 170cv EDC16 C39(can line): read/write by obd ok. Flash ecufailure: mode recovery ok.

Fiat Punto evo 1.3L jtdm 75cv Mareli Multijet MJD8F2/3 :read/write by obd ok. Flash ecufailure: mode recovery ok.

Susuki SX4 1.9L 120cvEDC16 C39 (can line): read/write by obd ok. Flash ecufailure: mode recovery ok.

edc16C39 and mjd8work fine on good V18….without recovery……..

Writeedc16C39failure with fgtec v54, solder failure at the usb socket,

Recovery of ecu with v18 mpps. I confirm my mpps, read write without problem.

Readingpsg16 opel zafira ok, writing ok but does not start, does not edit cheksum, write original, everything ok

Used MPPS V18 to Read Flash fromVauxhall Astra 1.7 CDTI 2012 Denso ECUvery quick with no issues.

And alsoEDC17 CP20 on Volkswagen Passat 2.0 TDI 2009took about 3 minutes..

Suzuki SX4 DDIS 1.9L 120hp, Bosch EDC16C39 2008,can & kline, read & write by obd ok.

mpps= read= unlok file = write unlok file = not boot = kess obd2 = open file unlok = write obd2 kess= ok

opel corsa 1.3jtd MT marelli ecu 6J0 C1,read/write true obd=ok. he reads 448kb and write it, wery fast…

Magneti Marelli 6f3, Reading at the BDM works very well!

Opel Corsa 2004 1.3cdti ecu Marelli MJD6JO.C2Read OK, Write NOT OK (using full read dump in both cases, read and write), ecu not booting at all…. need to fix it by BDM.

tested todayedc16u31 on mk5 golf for a egr off, and all ok read write on kline.

Source:http://blog.obdexpress.co.uk/2017/07/10/mpps-v21-good-or-not/

www.hobdii.com

Hide Comments | Add Comment