Tips & guides: VCM2 clone communicates with PCM and reprograms PCM with IDS software

VCM2 communication issues:

VCM2 IDS cannot communicate with PCM:

Nopuedeestablecersecomunicación con el PCM

De elcontacto

(Error message in English: Communication with the PCMcan notbe established

From the contact)

VCM2 Tech support:

It’s normal…

You can use the old version IDS 86 software

or

the latest version IDS 108 CD tested by pros

Then the problem will be solved!

Tips: PCM reprogramming withVCM2 SP177-c

Step 1 : Select the toolbox tab at the top of the screen

Step 2 : Select "Module Programming”

Step 3 : Select the tick mark or the Enter key

Step 4 : Select "Module Reprogramming”

Step 5 : From thefly outmenu, select the type of module to be reprogrammed

Step 6 : Select the tick mark or the Enter key

Step 7 : The application will compare the current calibration level to the latest one available for that vehicle. A message will appear.

Step 7A : If no later calibration is available, a message will appear indicating this. Select the tick mark or the Enter key to return to the Module Programming menu.

Step 7B : If a later calibration is available, a message will appear asking if you want to reprogram the module with this calibration. If you do not want to reprogram the module, select "No”. You will be returned to the Module Programming menu.

Step 8 : If you want to reprogram the module, select "Yes” in response to the question "Do you want to program the vehicle with this calibration?”

Step 9 : Make sure that an Internet connection has been established and then select "Confirm”

Step 10 : You will be presented with a screen that recommends that you carry out Self Test. If you choose to complete this test, you will receive a list of Diagnostic Trouble Codes (DTC’s) that have been set on the vehicle. When finished viewing this list, select "Exit”.

Step 11 : Follow the on-screen instructions to prepare the vehicle and turn the ignition key off and on.

Select the tick mark or the Enter key after each one.

Step 12 : If necessary, apply the reprogramming label to the PCM

If an emissions recall has been performed or a required emissions-related TSB has been completed, an Authorized Modification label must be placed on the PCM. These labels can be purchased at the parts counter of a Ford or Lincoln/Mercury dealership.

Step 13 : Select the tick mark or the Enter key to return to the Module Programming menu.

Src:http://blog.obdexpress.co.uk/2017/09/14/how-to-reprogram-ford-pcm-with-vcm2-clone/

Btw, PCM unrecognized solution:

http://blog.obdexpress.co.uk/2017/09/01/solved-vcm2-f250-error-pcm-is-unrecognized/

Hide Comments | Add Comment