2017Opcom firmware v1.65andOpcom firmware v1.70updated! This is how to step by step installOpcom firmware v1.65 v1.70 VAUX-COM 120309a on Windows 7.

Free downloadVAUX-COM 120309a software:

https://mega.nz/#!sPBnlZqT!vzaV6dx66ol0Y3gDrWDSAYZFjtkoBJz0cEtmuXWeOFc

Demo: How to install Opcom v1.65 v1.70 VAUX-COM 120309a

1.Install VAUX-COM Software

Open Computer

Open VAUX-COM-120309a DVD/CD-RW Drive or open free software file

Open VAUX-COM-120309a software

Accept license agreement

Click "Install” to install software

Installation progress, extracting file to C:/VAUX-COM-120309a+131223d file

2. Install Driver

Click "Extract” to extract FTDI CDM Drivers

Connect op-com cable with computer, system will install driver automatically

Right click Computer>>Manage>>Device Manager>>Universal Serial Bus controllers>>USB Serial Converter to check if opcom driver is well installed

3.Configure VAUX-COM

Right click VAUX-COM120309A+131223d GB software on desktop, select "Run as Administrator”

Loader has been installed into target

Open VAUX-COM 2012V software

Click "Settings” option

Select Interface type: VAUX-COM Revision B, B+

Then click "Test Interface” button

Then software will display firmware version, interface test ended successfully

Press "Save Config” to save settings

Press "OK”

4.Diagnose with OCPOM

Connect Opcom interface with vehicle

Back to VAUX-COM main menu

Select "Diagnostics”

Select "Automatic Vehicle Identification”

Select "KWP-2000” and diagnostic connector

Open will auto detect and display vehicle information

Start to diagnose your vehicle.

http://blog.obdexpress.co.uk/2017/04/24/how-to-install-opcom-firmware-v1-65-v1-70-vaux-com-120309a-windows-7/