Tested successfully! Yanhua Mini ACDP is able to make new keys to Porsche 2010-2018.

 

Tool: Yanhua Mini ACDP + Module 10

Time: around 8 minutes

Video demo:

Step-by-step instruction:

 

Run Mini ACDP Porsche software

ACDP starts to add new keys to Porsche...

Add new key for new Porsche - ICP IMMO - MC9S12XEP100 (Mask 1N35H) - Add key (auto mode)

Note:

- Pls prepare OBP+ICP adapter, BCM interface board, BCM module, BAV adapter and blank key

- It is forbidden to cut ACDP power off during the process of adding a key

- Pls store the original and programmed EEPROM/ DFLASH data as prompts.

Note:

- Pls connect ACDP device, OBP+ICP adapter, BCM interface board, BCM module

- Check the crystal oscillator package of BCM module: EXT1 short - circuited for ceramic packaged crystal oscillator, EXT2 short-circuited for metal packaged crystal oscillator

- Save the chip data read by the BCM module according to the software tips

Pin detection status:

When EXT contact is bad, check the EXT1 pin if the crystal oscillator is ceramic packaged or EXT2 pin if it’s metal packaged

It’s detected that the BCM module chip has been encrypted. Continue

Read PFLASH, EEPROM/ DFLASH data and save data

Immo information:

Pls make sure the info is correct

Note:

- Keep the ACDP device power on

Disconnect the OBP+ICP adapter and ACDP device firstly. (Keep the OBD+ICP adapter, BCM interface board and BCM module connected)

- Connect the ACDP device to the BAV-KEY adapter and put the key correctly in the BAV-KEY adapter

ACDP read out the current key ID

Select a number for adding a key

(the gray number is not optional, that mean this key number is already used or current key is already exit)

Mini ACDP is rogramming key...

Store DFLASH data

Note:

- Keep the ACDP device power on

Disconnect the OBP+ICP adapter and ACDP device firstly.

- Connect the ACDP device, OBD+ICP adapter, BCM interface board and BCM module

- Check the crystal oscillator package of BCM module: EXT1 short - circuited for ceramic packaged crystal oscillator, EXT2 short-circuited for metal packaged crystal oscillator

Pin detection status

It’s detected that the BCM module chip has been encrypted

Check the key information

Adding key completed

Pls install the BCM module back to the vehicle to confirm that the new key can be used normalyy

Success

 

 

 

 

Hide Comments | Add Comment