Free download and setuppcmflash1.94 1.95 for KTMflash ECU programmer clone, as well as KTMflash reviews.

Part 1:pcmflash1.94 / 1.95 free download

Please firstly confirm the version number on the USB key.

1)pcmflash1.94 free download

https://mega.nz/#!IcRXkIDZ!TXG9qZ1NJbWqaG7xHssyn2oIUx_rBV5NPM821nUJAd0

2)pcmflash1.95 free download

https://mega.nz/#!gFRBHS5S!pkOaxfaTkGIYqB7VdfjXih9uPAYQl_BmVskQ2LYJ6hE

Works withKTMflash ECU programmer perfectly.

Part 2: pcmflash 1.94 / 1.95 installation

PCMflash version: 1.1.94 for example:

Select Tractrix Inc. – OpenPort 2.0 J2534 ISO/CAN/VPW/PWM

Part 3: reviews onpcmflash1.94 / 1.95 working with KTMflash

checksum ok allok, readwriterapid ,excellent

tactrixconnected to the rear of the power box and in frontgptandtricorecable, cablegptandtricorektagseemsto be ok andhelpofdimsportorktagyes, good box.

this clone work same asoriwith goodtactrixhardware.

Guide:

Guide:

6 . Read Audi C7 DQ gearbox ok

Guide:

Guide:

Part 1:

Part 2:

Because the video is too long to upload for one time.

To be continued……

Source:http://blog.obdexpress.co.uk/2019/03/28/free-download-and-setup-pcmflash-1-94-1-95-for-ktmflash/

Hide Comments | Add Comment

Because some people are making some good money out of it (reworkclone KESS V2green PCB), let’s make it free for everyone.

PS: the following red parts are the correct method.

Transistors to use :

BCR112

MMUN2113

BC817

Murata filters:

NFE61PT472C1H9L (connect ground for all of them)

Correct method:

Connect MIDDLE PINS MURATTA FILTERS TO GROUND, not the signal

Capacitors:

1uF – 35V

220uF – 10V

10uF – 16V tantalum

Go Follow Picture.

I changed Voltage Stabilizators as well
1 x LM1117 3.3v
1 x PZT2907AT1G
1 x LM2575s 5.0V
all diodes SK14 (not required)
Micro SD Card to better quality if is NO NAME (BLANK on the top) but very carefull, is not easy just copy CONTENT, need generate againb becase another card have diffrent CID so will doesn`t work, if you copy 1:1

Compare withV5.017 Kess China clonegreen PCB:

BTW,reword has certain requirements on the user’s skills, please be careful. Invest the original one or the clone one will be better.

Thanks to @pocinas from DK forum.

Thanks Laurance editor.

SOURCE:http://blog.obdexpress.co.uk/2019/03/27/how-to-rework-clone-kess-v2-green-pcb/

Hide Comments | Add Comment

How to change Mercedes remote frequency from 315mhz to 433mhz, and the opposite… the machine to use isVVDI MBandKeydiy.

Press the Mercedes remote key upper button andKeydiydisplay the frequency 314.99(mhz)

Put this remote key into the slot of VVDI MB.

Click on VVDI tool "Other Function”, then "Set key remote frequency”.

Select "433MHz” and then "Set Frequency”.

Set Frequency successfully.

Press "Unlock / lock” button of Mercedes key, thenKeydiydisplay 433(mhz).

In the same way, change 433mhz to 355mhz.

That’s all.

Thanks

Source:http://blog.obdexpress.co.uk/2019/03/25/how-to-change-mercedes-remote-frequency/

Hide Comments | Add Comment

JMD Super-remote, available in mid-March 2019, comes withthree types of remote control: DS, Ford and Buick Oncora. Super remote control is acombination of chip and remote control, including chip and remote control functions. Super-remote controlgenerate electronic sub computers inHandy-baby II.

So, what questions do you have about this Super-remote? this post answers 10 questions that customers may ask.

Question 1: When does Super-remote come on the market?

Answer: Super-Remote control will be available at the end of March 2019 and can be purchased by contacting agents.

Question 2:How much is the Super-remote pricing?

Answer: No pricing.

Question 3:How many models and functions of remote control are there?

Answer: Now there are three types of remote control: DS, Ford and Buick Encore.

The three styles have different shapes and the same functions.

Question 4:What are the Super-remote supported Vehicles?

The type of chip supported by Super remote is the same as that of Super chip.

Including 4D/46/47/48/T5 chip types.

Specific support for remote control models can be seen in mobile phone APP 【Remote】-【JMD Remote】【JMD ELE-Remote】

Question 5:Does the Super-remote control contain chips?

Answer: Super remote control is a combination of chip and remote control, including chip and remote control functions.

Question 6:How does Super-remote control generate electronic subcomputers?

Answer: Electronic subcomputers can be directly generated inHandy-baby â…¡.

——Handybaby Ⅱ【chip-fun】

——【Remote Transfer】

——Choosing the Corresponding Vehicle Type

——Analog key for Handy-Baby Ⅱ antenna

——Matching with equipment on board

——When the matching is successful, the super remote control is put into the coil to generate the remote control.

Question 7:Is Super-remote control wired or wireless?

Answer: Super-remote supports both wired and wireless burning.

After selecting the corresponding model, APP will prompt you to choose the burning mode.

(Some models only support wired connections.)

Question 8:How does the Super-remote control generate the corresponding remote ?

Answer: Cooperate with Handy-baby II and APP to generate remote control.

——APP【Remote】

——【JMD Remote】

——Choosing the Corresponding Vehicle Type

——Choose the generation mode

——1. Connect Handy-baby II generation (wired)

——2.Remote Placement in Handy-baby II Recognition Coil Generation (Wireless)

Question 9: How to match the Super-remote copy to get on the car?

Answer: Super remote control matching methods include manual matching and equipment matching.

Matching remote control or all loss with JMD OBD.

Question 10 : Does JMD have ordinary remote control?

Answer: Super-remote control can be used as ordinary remote control. Ordinary remote control is planned.

Suggested feedback

Suggestions and Suggestions in the Use of Super Remote Control. Please give positive and timely feedback.

www.obdexpress.co.uk

Hide Comments | Add Comment

Hide Comments | Add Comment

In the aspect of capabilities, Autel MaxiDas DS808TS > MaxiCheck MX808TS > MaxiDas DS808 > MaxiCheck MX808. That isAutel MaxiDas DS808TS is the most powerful covering OBD diagnosis, service function, Immobilizer functions, TPMS function, Relearn function etc, and comes with advanced specifications.

Look at this comparison table:

source:http://blog.obdexpress.co.uk/2019/03/16/autel-maxidas-ds808ts-maxicheck-mx808ts-maxidas-ds808-maxicheck-mx808/

Hide Comments | Add Comment

2019 Super DSP III+new arrivedat obdexpress.co.uk, Compared with the old Super DSP3 odometer correction tool, It not only has a new outlook but also addnew updates are for car models with platform MQBAB-(Continental/VDO) from 6/2014-

2019 Super DSPIII+ VS 2018 Super DSP3, Here we go:

2019 Super DSP III+ wins 2018 Super DSP3 in:

ODOMETER:

MASERATI / QUATTROPORTE-95160 DIAG by OBD2

MASERATI / GHIBLI-95160 DIAG by OBD2

MASERATI / LEVANTE-95320 DIAG by OBD2

ODOMETER:

VW/GOLF SPORTSVAN 06.2014- NEC35XX DIAG by OBD2

VW/GOLF MK7 06.2014- NEC35XX DIAG by OBD2

VW/PASSAT B8 06.2014- NEC35XX DIAG by OBD2

VW/POLO 06.2014- NEC35XX DIAG by OBD2

VW/TIGUAN 06.2014- NEC35XX DIAG by OBD2

VW/TOURAN 06.2014- NEC35XX DIAG by OBD2

AUDI/A3 06.2014- NEC35XX DIAG by OBD2

AUDI/Q2 06.2014- NEC35XX DIAG by OBD2

SKODA/FABIA 06.2014- NEC35XX DIAG by OBD2

SKODA/RAPID 06.2014- NEC35XX DIAG by OBD2

SKODA/OCTAVIA 06.2014- NEC35XX DIAG by OBD2

SKODA/SUPERB 06.2014- NEC35XX DIAG by OBD2

SEAT/IBIZA 06.2014- NEC35XX DIAG by OBD2

SEAT/TOLEDO 06.2014- NEC35XX DIAG by OBD2

SEAT/LEON 06.2014- NEC35XX DIAG by OBD2

*ATTENTION: The above new updates are for car models with platform MQBAB-(Continental/VDO) from 6/2014-

 

2019 Super DSP 3+ can work with the MQB models (continental / vdo) from 6/ 2014:

 

2019 Super DSP 3+ vehicle coverage details:

http://www.obdexpress.co.uk/wholesale/2019-super-dspiii-odomter-correction-tool.html

 

2019 Super DSP 3+ full package with new outlook:

2018 Super DSP3 outlook:

Source: http://www.obdexpress.co.uk/wholesale/super-dspiii-plus-fully.html

 

DSP 3 Original vs Super DSP 3 Plus Clone

	Data Specialist Plus 3 Original	Super DSP 3 Plus Clone
Image
Price	DSP 3+ full version: $8990 DSP 3+ immo version: $4890 DSP 3+ limited version: $6990	DSP 3+ odometer correction: $889
Digital odometers	Yes	Yes
Airbag modules	Yes	No
Car Radios	Yes	No
Immobilizers	Yes	No

Super DSP 3 Plus is another DSP3 mileage correction version & copy version. So, it has a much better price. For odometer correction for vehicles from 2010 to 2017, DSP 3+ copy is a good investment. It can change km via OBD, and help you save a lot.

 

super dsp3 feedback:

 

1. 2012 Audi A8 3min

 

2. The magic about this machine - most tools need to read S-Key and prepare dump using a programmer and then change miles for the Audis 2011+This tool does it all OBD - one of the only few tools that can do the 10/11+ Audis without preparing the dump, all in 30 seconds, Amazing! Very similar to Enigma/DP4.

 

3. 2012 Porsche Cayenne- 2 min

 

4. 2013 Audi A5 - 10min

 

Quoted from

https://www.digital-kaos.co.uk/forums/showthread.php/699392-Super-DSP3-Feedback/

 

5. super dsp3 only works from 2010 only by OBD !!! What comes measured that does works well.

Hide Comments | Add Comment

Hide Comments | Add Comment

I have the TPROT Level of this file from BMW X1 E84 10.2009.

I have attached Readout fromkessECU chip tunning.

https://mega.nz/#!UEhkmQRD!iaoRDQDNdcTCcWw50AlwQbFbF6erFofb1-fsQsN5jvI

Jobdone,with KTAGBootmodeand ONLYBOOTMODE.

some list save/donttouch by OBD

BMW EDC17

OBD2 SAFE 1037-

• 390654

• 390655

• 390656

• 390657

• 391386

• 391387

• 391388

• 393182

• 394078

• 394079

• 394080

• 395777

• 395779

• 396560

• 396562

• 396563

• 396565

• 500771

• 500772

• 507452

• 509475

• 509476

BMW EDC17

BOOT ONLY 1037-

• 389229

• 389230

• 391389

• 392383

• 395774

• 395778

• 396564

• 396567

• 397454

• 397572

• 399762

• 399763

• 399764

• 399768

• 400488

• 500770

• 501603

• 501612

• 501613

• 501614

• 502660

• 504248

• 504297

• 504298

• 504299

• 504976

• 504977

• 506047

• 507434

• 507435

• 507446

• 507449

• 507450

• 507451

• 507453

• 509478

• 509479

• 513572

• 513573

• 513581

• 513582

• 514074

• 515065

• 515070

• 515071

• 517681

• 517682

• 518559

• 522657

• 525082

Thanks.

www.obdexpress.co.uk

Who Like This Article Also Viewed:

Hide Comments | Add Comment

Free update:Yanhua Mini ACDPadd new function: renew the EEPROM data of CAS1 – CAS4:

CAS1 (0K50E)

CAS2 (2k79x)

CAS3 (0L01Y/0L15Y/0M23S)

CAS4 (1L15Y / 5M48H /1N35H) refresh & coding by ICP.

Why Yanhua ACDP add "renew theEEPROM data of CAS1 – CAS4″?

Renew the EEPROM data of CAS1-CAS4. New EEPROM data can be generated by loading EEPROM data of other cars, modifying vehicle frequency, VIN, ISN code and other info, to solve the problem of replacement a CAS module because of missing EEPROM data of CAS module or failed

reading EEPROM data of CAS module.

Step 1:

Prepare a working EEPROM data of the corresponding EEPROM model and copy it to APP path as follows: "/Atmatch/bmw/CAS4/CAS_Renew”, then select the corresponding EEPROM file to calculate the parameters.

Step 2

Enter the VIN number, vehicle frequency, ISN code, etc that need to be modified, modify the loaded data and save it, the ACDP will automatically clear the CAS mileage.

Step 3

Write the saved new EEPROM data to the CAS module, then install the CAS module back to the BMW.

Step 4.

If the vehicle cannot be started or the direction lock is displayed on the instrument after the module is installed back to BMW, please synchronize ELV or DME.

Step 5:

Use professional equipment to decode the vehicle.

Note:

The original car keys have been disabled, itneedto be re-learned to start the car.

Done.

FYI, the above free updates are for Yanhua Mini ACDP with cas1- CAS4 module

http://www.obdexpress.co.uk/wholesale/yanhua-mini-acdp-master-plus-bmw-cas1-cas4-immo-odometer.html

Image:fullpackage of Yanhua Mini ACDP

Image:full package of BMW CAS1 CAS2 CAS3 CAS3+ CAS4 CAS4+ module

Who Like This Article Also Viewed:

Hide Comments | Add Comment

Free update:Yanhua Mini ACDPadd new function: renew the EEPROM data of CAS1 – CAS4:

CAS1 (0K50E)

CAS2 (2k79x)

CAS3 (0L01Y/0L15Y/0M23S)

CAS4 (1L15Y / 5M48H /1N35H) refresh & coding by ICP.

Why Yanhua ACDP add "renew the EEPROM data of CAS1 – CAS4″?

Renew the EEPROM data of CAS1-CAS4. New EEPROM data can be generated by loading EEPROM data of other cars, modifying vehicle frequency, VIN, ISN code and other info, to solve the problem of replacement a CAS module because of missing EEPROM data of CAS module or failed

reading EEPROM data of CAS module.

Step 1:

Prepare a working EEPROM data of the corresponding EEPROM model and copy it to APP path as follows: "/ Atmatch/ bmw/CAS4/CAS_Renew”, then select the corresponding EEPROM file to calculate the parameters.

Step 2

Enter the VIN number, vehicle frequency, ISN code, etc that need to be modified, modify the loaded data and save it, the ACDP will automatically clear the CAS mileage.

Step 3

Write the saved new EEPROM data to the CAS module, then install the CAS module back to the BMW.

Step 4.

If the vehicle cannot be started or the direction lock is displayed on the instrument after the module is installed back to BMW, please synchronize ELV or DME.

Step 5:

Use professional equipment to decode the vehicle.

Note:

The original car keys have been disabled, itneedto be re-learned to start the car.

Done.

FYI, the above free updates are for Yanhua Mini ACDP with cas1- CAS4 module

http://www.obdexpress.co.uk/wholesale/yanhua-mini-acdp-master-plus-bmw-cas1-cas4-immo-odometer.html

Image: fullpackage of Yanhua Mini ACDP

Image:full package of BMW CAS1 CAS2 CAS3 CAS3+ CAS4 CAS4+ module

Who Like This Article Also Viewed:

Hide Comments | Add Comment

Hide Comments | Add Comment

NewTactrix Openport2.0+wo n’tbelocked any more,

ithasa stableperformance . The chip is new and imported not like the cheaper one in the market who use second- hand chip. Moreover, Tactrix Openport2.0+ is about €5 cheaper than Dialink J2534 Cable.

Image 1: Tactrix Openport2.0+

Image 2: Dialink J2534 Cable.

However, you are required to remember these using tips of Tactrix Openport2.0+:

Tactrix Openport2.0+reviews:

Read:Tactrix Openport2.0+ supported ECU models

Source:http://blog.obdexpress.co.uk/2019/03/06/new-tactrix-openport-2-0-wont-be-locked-stable-cheap/

 

Hide Comments | Add Comment

Golf Mark VII MQBadd key via OBD can be done with bothSupervagandLonsdorK518ISE.

Newestupdate of Supervag can add a key for Golf Mark VII MQB successfully.

Check supported VAG car models:

http://www.supervag-key.com/vehicle-coverage/vehicle-coverage-supervag-key/

video tutorial:

"Precoded key” -they probably mean dealer key.

Pros:

for me is very useful, easyto use and save a lot of time.

Cons: the price is high, some users can’t afford it.

UpdateLonsdorK518ISE /K518S to the newest version, it is good for MQB key !! Work fine add key on golf mk72015 ! Very fast and easy !!! Bravo !!

This is the part number:

PS: forLonsdorK518ISE, MQB Mainland is supported, Jonson Control is not supported yet.

Lookthis PDF:http://www.obdexpress.co.uk/upload/pro/k518s-vehicle-functions-support-list.xls

Who Like This Article Also Viewed:

Hide Comments | Add Comment

BothLonsdorK518S andLonsdorK518ISEshare the same Immo functions and vehicle coverage.what thedifferentis thesubscriptions for the newer updates.

LonsdorK518S:

http://www.obdexpress.co.uk/wholesale/lonsdor-k518s-one-year-suscription.html

http://www.obdexpress.co.uk/wholesale/lonsdor-k518s-update-subscription-for-lifetime.html

Source:http://www.obdexpress.co.uk/wholesale/lonsdor-k518s-key-programmer.html

PDF:LonsdorK518S function list

***

The parts withblack words are free forever.

The red parts need money.

LonsdorK518ISE (English version):

LonsdorK518ISE reviews: better and better (Same asK518S)

I used it for Megane 3 with Smart Card system.Programmedkey card in 2 minutes. No need pin code or anything….

Seems they have finally gota goodcompetition for the Zedfull…..

Hondaaccord2012. Add key ok

tooklongwhile, 5 minutes per card, MVP coded all cards in under 30 seconds, workingperfect…

read pin ok

add key ok

307 Kline read pinfail / addkey ok

Lonsdorreadpinand program key 2min .

all key lost

Program without pin – OK (2min)

add key (all key lost) work all ok

I20 2014, read pin without working key and program key OK.

AKL ok

Add Keys ok

Source:http://blog.obdexpress.co.uk/2019/03/02/2019-lonsdor-k518s-vs-k518ise-more-user-friendly/

Hide Comments | Add Comment